 |
 |
 |
 |
 |
 |
||
 |
 |
 |
 |
 |
| 5 | 1/1 | 返回列表 |
| 查看: 2450 | 回復: 3 | |||
| 當前只顯示滿足指定條件的回帖，點擊這里查看本話題的所有回帖 | |||
mengxiangke鐵蟲 (小有名氣)
|
[求助]
求大神看下哪里有錯誤 已有1人參與
|
||
|
/PREP7 ET,1,PLANE13 KEYOPT,1,1,4 MP,DENS,1,8900 !輸入結晶器的材料性能參數 MP,KXX,1,,3.93 MP,C,1,385 MPTEMP,,,,,,,, MPTEMP,1,30 MPTEMP,2,500 MPTEMP,3,1000 MPTEMP,4,1500 MPTEMP,5,2000 MPDATA,EX,1,,1.03E+011 MPDATA,EX,1,,8.4E+010 MPDATA,EX,1,,2.3E+010 MPDATA,EX,1,,2E+009 MPDATA,EX,1,,2E+008 MPDATA,EX,1,,2E+008 MPDATA,NUXY,1,,0.3 MPDATA,NUXY,1,,0.3 MPDATA,NUXY,1,,0.3 MPDATA,NUXY,1,,0.3 MPDATA,NUXY,1,,0.3 MP,ALPX,1,1.66E-5 !輸入鑄件材料性能參數 !鑄件熱傳導系數 MPTEMP,,,,,,,, MPTEMP,1,20 MPTEMP,2,100 MPTEMP,3,200 MPTEMP,4,300 MPTEMP,5,400 MPTEMP,6,425 MPTEMP,7,600 MPTEMP,8,630 MPTEMP,9,700 MPTEMP,10,800 MPDE,KXX,2 MPDATA,KXX,2,,77 MPDATA,KXX,2,,87 MPDATA,KXX,2,,97 MPDATA,KXX,2,,107 MPDATA,KXX,2,,117 MPDATA,KXX,2,,122 MPDATA,KXX,2,,60 MPDATA,KXX,2,,58 MPDATA,KXX,2,,240 MPDATA,KXX,2,,240 MPTEMP,,,,,,,, !鑄件比熱 MPTEMP,1,20 MPTEMP,2,100 MPTEMP,3,200 MPTEMP,4,300 MPTEMP,5,400 MPTEMP,6,600 MPTEMP,7,700 MPDE,C,2 MPDATA,C,2,,1020 MPDATA,C,2,,1020 MPDATA,C,2,,1100 MPDATA,C,2,,1150 MPDATA,C,2,,1220 MPDATA,C,2,,1400 MPDATA,C,2,,1400 MP,EX,2,45000 !鑄件彈性模量 MP,ALPX,2,26.8E-6 !鑄件線膨脹系數 MP,NUXY,2,0.35 !鑄件泊松比 !幾何建模 !生成矩形面 RECTNG,0,0.05,0,0.01 RECTNG,0.02,0.03,0.01,0.1 RECTNG,0,0.05,0.1,0.11 RECTNG,-0.01,0.06,-0.01,0.02 RECTNG,0.01,0.04,0.02,0.09 RECTNG,-0.01,0.06,0.09,0.12 AADD,1,2,3 !面相加操作 APLOT,ALL AADD,4,5,6 NUMCMP,AREA !壓縮面編號 APLOT,ALL SMRTSIE,4 MAT,2 AMESH,1 !對面進行網格劃分 APLOT,ALL !顯示面 MAT,1 AMESH,2 NUMMRG,NODE !合并相同節點 NUMCMP.LINE !壓縮線段數 NUMCMP,NODE !壓縮節點數 SAVE LPLOT,ALL !顯示線段 /PNUM,LINE LSEL,S,LINE,,3,9,2 LSEL,A,LINE,,13,20 SFL,ALL,CONV,454.5,,25 !施加對流邊界條件 ALLSEL SAVE FINISH /SOLU !進入求解器 ANTYPE,TRANS TIMINT,OFF !進行穩態分析，確定初始條件 TIME,0.01 DELTIM,0.01 ASEL,S,,,1 NSLA,S,1 D,ALL,TEMP,700 !施加溫度載荷 ALLSEL ASEL,S,,,2 NSLL,S,1 D,ALL,TEMP,25 !施加溫度載荷 ALLSEL LSEL,S,,,21 NSLL,S,1 D,ALL,UY ALLSEL SOLVE !得到初始溫度分布 TIMINT,ON !進行瞬態分析 TIME,120 !設置計算終止時間 AUTOTS,-1 DELTIM,1,0.1,25,1 KBC,0 DDELE,ALL,TEMP !刪除穩態分析中定義的節點溫度 OUTRES,ALL,ALL SOLVE FINISH 這是鎂合金充入一個工字型的鑄造結晶器后冷卻過程中的溫度場分布，是參照書上的例子做出來的，但是和書上的結果不一樣，內部的鑄件初始溫度竟然是25度。 |
回復此樓» 猜你喜歡
295求調劑
已經有3人回復
-
數一英一271專碩（085401）求調劑，可跨
已經有7人回復
-
070305高分子化學與物理 304分求調劑
已經有6人回復
-
0703化學調劑，求導師收
已經有10人回復
-
各位老師好，我的一志愿為北京科技大學085601材料專碩
已經有5人回復
-
一志愿太原理工安全工程300分，求調劑
已經有6人回復
-
0856求調劑
已經有4人回復
-
11408軟件工程求調劑
已經有3人回復
-
一志愿211 初試270分 求調劑
已經有8人回復
-
300求調劑，材料科學英一數二
已經有6人回復
» 本主題相關商家推薦: (我也要在這里推廣)
» 本主題相關價值貼推薦，對您同樣有幫助:
- 文章被拒了，請各位大神支個招看能改投哪里
已經有10人回復
- 【急】求大神解決Linux終端顯示問題：vmd、i2打不開
已經有5人回復
- 求教！哪位大神幫我看看狄拉克方程里的一個問題啊��！
已經有11人回復
- DLPOLY中出現ERROR648錯誤，求大神啊，求幫忙啊
已經有5人回復
- 求教大神們一個問題，水泥為啥能粘合石頭磚塊啊？請從微觀角度回答
已經有4人回復
- matlab出錯。。。求大神解答。。。
已經有3人回復
- 求大神幫忙�。◎v達w311無線路由器設置出現問題
已經有2人回復
- 求大神，求候博��！HSE加電場報錯：LAPACK: Routine ZPOTRF failed! （散盡金幣求助）
已經有6人回復
- 求大神幫我改一下下面的程序！matlab迭代法的 不知道錯在哪里！
已經有7人回復
- 13考研專業課報錯了，急求大神幫助！~~
已經有29人回復
- C類G類錯誤DT的Reviewer 之一居然要求改，有哪位大神能救我？
已經有4人回復
- 求助各位大神關于含組氨酸標簽蛋白純化的問題
已經有8人回復
- 到哪里能夠找到好的中文文獻 我是俄語生 只會俄語 英文文獻看不懂 求大神幫忙
已經有18人回復
- 接觸fluent時間很短。。弱弱的問幾個問題 希望有大神解答
已經有13人回復
- 有機問高分子的問題！~！蛋白連接，金幣可追加，求大神
已經有13人回復
- 跪求大神幫忙解決A類錯誤
已經有3人回復
- 求大神幫忙研究一下關于鋁合金的抗彎強度的問題！�。。。。�！
已經有13人回復
- 求教一個origin中的問題，求大神指點
已經有4人回復
3樓2018-10-26 14:39:32
【答案】應助回帖
★ ★ ★
感謝參與，應助指數 +1
xiegangmai: 金幣+3, 謝謝參與！ 2013-05-14 21:29:46
感謝參與，應助指數 +1
xiegangmai: 金幣+3, 謝謝參與！ 2013-05-14 21:29:46
|
試了一下，有不少警告信息，如下： /COM,ANSYS RELEASE 12.0.1 UP20090415 08:52:22 05/14/2013 *** WARNING *** CP = 2.141 TIME= 08:53:11 Material property table exceeds the number of defined temperatures. Number of temperatures is 5. The number of data values is 6. *** WARNING *** CP = 2.266 TIME= 08:53:11 Entity 2 is undefined. The MPDE command is ignored. *** WARNING *** CP = 2.875 TIME= 08:53:15 Unknown NUMCMP label . Command ignored. Valid labels = NODE ELEM KP LINE AREA VOLU MAT TYPE REAL CP CE ALL. *** WARNING *** CP = 3.203 TIME= 08:53:15 Both solid model and finite element model boundary conditions have been applied to this model. As solid loads are transferred to the nodes or elements, they can overwrite directly applied loads. *** WARNING *** CP = 3.391 TIME= 08:53:16 Element 1 references undefined MURX or BH table for material 2. *** WARNING *** CP = 3.406 TIME= 08:53:16 Element 237 references undefined MURX or BH table for material 1. *** WARNING *** CP = 3.766 TIME= 08:53:47 Material property KXX of material 2 of element 158 is evaluated at a temperature of 0, which is below the supplied temperature range. Temperature range checking terminates. *** WARNING *** CP = 3.812 TIME= 08:53:48 There are 4 small equation solver pivot terms. This may be a transitional effect caused by the Newton-Raphson logic. *** WARNING *** CP = 3.875 TIME= 08:53:48 There are 4 small equation solver pivot terms. This may be a transitional effect caused by the Newton-Raphson logic. *** WARNING *** SUPPRESSED MESSAGE CP = 3.938 TIME= 08:53:49 There are 4 small equation solver pivot terms. This may be a transitional effect caused by the Newton-Raphson logic. *** WARNING *** SUPPRESSED MESSAGE CP = 4.000 TIME= 08:53:49 The calculated reference FORCE CONVERGENCE VALUE = 3.234287945E-10 is less than the default minimum of 1 (which can be modified using the MINREF field of the CNVTOL command). Check results carefully. *** WARNING *** CP = 4.156 TIME= 08:54:01 Changing the analysis type is only valid within the first load step. Pressing OK will cause you to exit and re-enter SOLUTION. This will reset the load step count to 1. 警告信息與你的命令流的對應關系，請見以下命令流中的注解 !*** 部份： fini /clear /filname, mengxiangke /PREP7 ET,1,PLANE13 KEYOPT,1,1,4 MP,DENS,1,8900 !輸入結晶器的材料性能參數 MP,KXX,1,,3.93 MP,C,1,385 MPTEMP,,,,,,,, MPTEMP,1,30 MPTEMP,2,500 MPTEMP,3,1000 MPTEMP,4,1500 MPTEMP,5,2000 MPDATA,EX,1,,1.03E+011 MPDATA,EX,1,,8.4E+010 MPDATA,EX,1,,2.3E+010 MPDATA,EX,1,,2E+009 MPDATA,EX,1,,2E+008 MPDATA,EX,1,,2E+008 !*** 這一句是多余的，應該刪除 MPDATA,NUXY,1,,0.3 MPDATA,NUXY,1,,0.3 MPDATA,NUXY,1,,0.3 MPDATA,NUXY,1,,0.3 MPDATA,NUXY,1,,0.3 MP,ALPX,1,1.66E-5 !輸入鑄件材料性能參數 !鑄件熱傳導系數 MPTEMP,,,,,,,, MPTEMP,1,20 MPTEMP,2,100 MPTEMP,3,200 MPTEMP,4,300 MPTEMP,5,400 MPTEMP,6,425 MPTEMP,7,600 MPTEMP,8,630 MPTEMP,9,700 MPTEMP,10,800 MPDE,KXX,2 !*** 前面沒有定義過材料 2，所以這一句是多余的 MPDATA,KXX,2,,77 MPDATA,KXX,2,,87 MPDATA,KXX,2,,97 MPDATA,KXX,2,,107 MPDATA,KXX,2,,117 MPDATA,KXX,2,,122 MPDATA,KXX,2,,60 MPDATA,KXX,2,,58 MPDATA,KXX,2,,240 MPDATA,KXX,2,,240 MPTEMP,,,,,,,, !鑄件比熱 MPTEMP,1,20 MPTEMP,2,100 MPTEMP,3,200 MPTEMP,4,300 MPTEMP,5,400 MPTEMP,6,600 MPTEMP,7,700 MPDE,C,2 !*** 這一句也是多余的 MPDATA,C,2,,1020 MPDATA,C,2,,1020 MPDATA,C,2,,1100 MPDATA,C,2,,1150 MPDATA,C,2,,1220 MPDATA,C,2,,1400 MPDATA,C,2,,1400 MP,EX,2,45000 !鑄件彈性模量 MP,ALPX,2,26.8E-6 !鑄件線膨脹系數 MP,NUXY,2,0.35 !鑄件泊松比 !*** 后面用到材料 1 和 2 的 MURX or BH，但是這里沒有定義過這兩個屬性 !*** 后面用到溫度 0 時的材料屬性 kxx ，但是這里定義的屬性溫度從 20 開始 !幾何建模 !生成矩形面 RECTNG,0,0.05,0,0.01 RECTNG,0.02,0.03,0.01,0.1 RECTNG,0,0.05,0.1,0.11 RECTNG,-0.01,0.06,-0.01,0.02 RECTNG,0.01,0.04,0.02,0.09 RECTNG,-0.01,0.06,0.09,0.12 AADD,1,2,3 !面相加操作 APLOT,ALL AADD,4,5,6 NUMCMP,AREA !壓縮面編號 APLOT,ALL SMRTSIE,4 MAT,2 AMESH,1 !對面進行網格劃分 APLOT,ALL !顯示面 MAT,1 AMESH,2 NUMMRG,NODE !合并相同節點 NUMCMP.LINE !壓縮線段數 !*** numcmp 后面應該是逗號 NUMCMP,NODE !壓縮節點數 SAVE LPLOT,ALL !顯示線段 /PNUM,LINE LSEL,S,LINE,,3,9,2 LSEL,A,LINE,,13,20 SFL,ALL,CONV,454.5,,25 !施加對流邊界條件 ALLSEL SAVE FINISH /SOLU !進入求解器 ANTYPE,TRANS TIMINT,OFF !進行穩態分析，確定初始條件 TIME,0.01 DELTIM,0.01 ASEL,S,,,1 NSLA,S,1 D,ALL,TEMP,700 !施加溫度載荷 ALLSEL ASEL,S,,,2 NSLL,S,1 D,ALL,TEMP,25 !施加溫度載荷 ALLSEL LSEL,S,,,21 NSLL,S,1 D,ALL,UY ALLSEL SOLVE !得到初始溫度分布 TIMINT,ON !進行瞬態分析 TIME,120 !設置計算終止時間 AUTOTS,-1 DELTIM,1,0.1,25,1 KBC,0 DDELE,ALL,TEMP !刪除穩態分析中定義的節點溫度 OUTRES,ALL,ALL SOLVE FINISH ! 這是鎂合金充入一個工字型的鑄造結晶器后冷卻過程中的溫度場分布，是參照書上的例子做出來的， ! 但是和書上的結果不一樣，內部的鑄件初始溫度竟然是25度。 !*** 此外，求解時出現小主元，可能約束不足 !*** 由于有上述問題，是求解結果可能是不對的。 |
2樓2013-05-14 10:15:21
shgao20
專家顧問 (職業作家)
-
專家經驗: +809 - 仿真EPI: 1
- 應助: 1311 (講師)
- 金幣: 13381.4
- 紅花: 267
- 帖子: 3531
- 在線: 473.4小時
- 蟲號: 3644138
- 注冊: 2015-01-14
- 專業: 動力學與控制
- 管轄: 仿真模擬
4樓2018-10-27 08:42:08
| 最具人氣熱帖推薦 [查看全部] | 作者 | 回/看 | 最后發表 | |
|---|---|---|---|---|
|
[考研] 一志愿211 初試270分 求調劑 +7 | 谷雨上岸 2026-03-23 | 8/400 |
|
|---|---|---|---|---|
|
|
[考研] 學碩274求調劑 +9 | Li李魚 2026-03-26 | 9/450 |
|
|
[考研] 本科雙非材料，跨考一志愿華電085801電氣，283求調劑，任何專業都可以 +6 | 芝士雪baoo 2026-03-28 | 7/350 |
|
|
|
[考研] 291求調劑 +6 | HanBeiNingZC 2026-03-24 | 6/300 |
|
|
|
[考研] 285求調劑 +4 | AZMK 2026-03-27 | 7/350 |
|
|
|
[考研] 283求調劑（080500） +4 | A child 2026-03-27 | 4/200 |
|
|
|
[考研] 348求調劑 +4 | 小懶蟲不懶了 2026-03-27 | 5/250 |
|
|
|
[考研] 312求調劑 +9 | 上岸吧ZJY 2026-03-22 | 13/650 |
|
|
|
[考研] 324求調劑 +5 | hanamiko 2026-03-26 | 5/250 |
|
|
|
[碩博家園] 招收生物學/細胞生物學調劑 +3 | IceGuo 2026-03-26 | 4/200 |
|
|
|
[考研] 325求調劑 +5 | 李嘉圖·S·路 2026-03-23 | 5/250 |
|
|
|
[考研] 321求調劑 +6 | Ymlll 2026-03-24 | 6/300 |
|
|
|
[考研] 297求調劑 +6 | 田洪有 2026-03-26 | 6/300 |
|
|
|
[考研] 一志愿河工大 081700 276求調劑 +4 | 地球繞著太陽轉 2026-03-23 | 4/200 |
|
|
|
[考研] 一志愿中南大學化學學碩0703總分337求調劑 +7 | niko- 2026-03-22 | 7/350 |
|
|
|
[考研] 26考研-291分-廈門大學（085601）-柔性電子學院材料工程專業求調劑 +3 | min3 2026-03-24 | 4/200 |
|
|
|
[考研] 282求調劑 +3 | wcq131415 2026-03-24 | 3/150 |
|
|
|
[考研] 277分求調劑，跨調材料 +3 | 考研調劑lxh 2026-03-24 | 3/150 |
|
|
|
[考研] 336化工調劑 +4 | 王大坦1 2026-03-23 | 5/250 |
|
|
|
[考研] 石河子大學（211、雙一流）碩博研究生長期招生公告 +3 | 李子目 2026-03-22 | 3/150 |
|