| 3 | 1/1 | 返回列表 |
| 查看: 457 | 回復: 2 | ||
| 本帖產生 1 個 翻譯EPI ,點擊這里進行查看 | ||
satanwy木蟲 (正式寫手)
|
[求助]
漢譯英一段話,謝謝~
|
|
| 從圖4(a)、(b)中可以看出,改性劑濃度越低,靜曲強度和彈性模量在不同樹高位置提高率越均衡合理。而高濃度改性劑(改性劑濃度為6%)時,在不同高度位置力學性能有較明顯的遞減。這可能是低濃度的改性劑不易在木材導管及孔隙內聚集并固化,而當改性劑濃度升高時,改性劑極易在短時間內就聚集在樹底部的導管與孔隙內,固化并阻塞了改性劑往樹梢方向的流動,從而影響了改性劑在立木內部的均勻分布,影響了靜曲強度及彈性模量的變化率。同時,從圖4(b)、(c)可以看出,在加入聚乙二醇后,靜曲強度及彈性模量在不同樹高位置的變化率更均勻,變化梯度不明顯。其中在樹底部位置與樹干其它位置的變化率沒有明顯的遞減,反而在加入聚乙二醇后,往樹梢位置,樹干的力學強度變化較樹底部有更顯著的提高。這可能是加入聚乙二醇后,作為一種表面活性劑,其能有效的使改性劑在樹干內部擴散,而不易于在導管及孔隙內聚集固化,阻塞改性劑往樹干上部的擴散,使得改性劑可以在改性過程中不斷的在樹干中上部富集,從而使得樹高高度越大的位置靜曲強度和彈性模量變化率越大。 |
版主 (文壇精英)
|
MOR (static bending strength or modulus of rupture) , MOE (modulus of elastic), It can be seen from Figure4(a) and 4(b)that the lower the concentration of the modifier, the more reasonable the MOR and MOE improvement rate of different tree height positions . At high concentrations modifier (modifier concentration of 6%), the mechanical properties at different height locations much obviously decreased. It might be that low concentration modifier is difficult to aggregate and cure in wood pores and high concentration modifying agent is easily collected in the catheters and pores in a short time , which solidified and clogged the modifier's flow to the direction of the treetop, thus affected the uniform distribution of modifiers inside the standing tree and the change rate of the MOR and MOE .It can also be seen from Figure 4 (b) and 4 (c)that with the addition of polyethylene glycol, the change rate of MOR and MOE at different height positions become more uniform and less obvious . Where in the bottom of the tree trunk and other locations ,the rate of change has no significant decrement. While the mechanical strength of the tree trunk has more significant improvement toward the treetop than the bottom after the polyethylene glycol was added to . It might be that the added polyethylene glycol, as a surfactant, can effectively diffuse the modifier inside the trunk. So it is not easy for the modifier to aggregate in the pores and catheter and cure. The upper blocked modifier diffusion promoted modifier enrichment in the upper tree trunk in the process of modification so that the change rate of MOR and MOE of greater tree height is much greater. 供你參考,一直以為樹是高科技詞匯,實際上好像就是樹,應該沒錯吧! |

版主 (文壇精英)

| 3 | 1/1 | 返回列表 |
| 最具人氣熱帖推薦 [查看全部] | 作者 | 回/看 | 最后發表 | |
|---|---|---|---|---|
|
[考研] 0854人工智能方向招收調劑 +3 | 章小魚567 2026-03-24 | 3/150 |
|
|---|---|---|---|---|
|
[考研] 【雙一流院校新能源、環境材料,材料加工與模擬招收大量調劑】 +4 | Higraduate 2026-03-22 | 7/350 |
|
|
[考研] 材料與化工328分調劑 +4 | 。,。,。,。i 2026-03-23 | 4/200 |
|
|
[考研] 一志愿中南大學化學學碩0703總分337求調劑 +5 | niko- 2026-03-22 | 5/250 |
|
|
[考研] 工科0856求調劑 +5 | 沐析汀汀 2026-03-21 | 5/250 |
|
|
[考研] 298求調劑 +8 | 上岸6666@ 2026-03-20 | 8/400 |
|
|
[考研] 333求調劑 +6 | 87639 2026-03-21 | 10/500 |
|
|
[考研] 石河子大學(211、雙一流)碩博研究生長期招生公告 +3 | 李子目 2026-03-22 | 3/150 |
|
|
[考研] 318求調劑 +4 | plum李子 2026-03-21 | 7/350 |
|
|
[考研] 求調劑 +7 | Auroracx 2026-03-22 | 7/350 |
|
|
[考研] 354求調劑 +7 | Tyoumou 2026-03-18 | 10/500 |
|
|
[考研] 求調劑 +4 | 要好好無聊 2026-03-21 | 4/200 |
|
|
[考研] 297求調劑 +3 | 喜歡還是不甘心 2026-03-20 | 3/150 |
|
|
[考研] 313求調劑 +4 | 肆叁貳壹22 2026-03-19 | 4/200 |
|
|
[考研] 296求調劑 +4 | www_q 2026-03-20 | 4/200 |
|
|
[考研] 317求調劑 +5 | 申子申申 2026-03-19 | 9/450 |
|
|
[考研] 一志愿吉林大學材料學碩321求調劑 +11 | Ymlll 2026-03-18 | 15/750 |
|
|
[考研] 0856調劑,是學校就去 +8 | sllhht 2026-03-19 | 9/450 |
|
|
[考研] 085600材料與化工調劑 324分 +10 | llllkkkhh 2026-03-18 | 12/600 |
|
|
[考研] 【同濟軟件】軟件(085405)考研求調劑 +3 | 2026eternal 2026-03-18 | 3/150 |
|