版塊導航: 正在加載中...

應《網絡安全法》要求，自2017年10月1日起，未進行實名認證將不得使用互聯網跟帖服務。為保障您的帳號能夠正常使用，請盡快對帳號進行手機號驗證，感謝您的理解與支持！

24小時熱門版塊排行榜

返回列表

本帖產生 1 個 翻譯EPI ，點擊這里進行查看

huangguaha

木蟲之王 (文壇精英)

我不是我

應助: 3 (幼兒園)
貴賓: 0.325
金幣: 117017
散金: 4369
紅花: 55
沙發: 22
帖子: 13924
在線: 1074小時
蟲號: 600165
注冊: 2008-09-12
專業: 鋼鐵冶金

[求助] 英譯漢

3. Ring tensile test
3.1 The sections of pipe measuring about 15 mm in length shall have plane and smoothed ends and shall be at right angle to the pipe axis. To perform this test,
the pipe sections are stretched in a tensile testing machine until fracture occurs using two pins with a diameter equal to at least three times the wall thickness of the pipe, see Figure 2.10. In the case of welded pipes, the specimen shall be placed in the tensile testing device in such a way that the welded seam lies at 90° to the direction of the tensile load.
The rate of the pins may not exceed 5 mm/s.
4. Drift expanding test
4.1 To perform this test, a tapered drift is forced into the specimen until the outside diameter has increased to the prescribed value C for the product in question, see Figure 2.11. The length of the specimen and the taper angle β of the drift shall be as shown in the following Table. The intrusion rate of the taper may not exceed 50 mm/s.

5. Flanging test
5.1 To perform this test, a sample of pipe with a length L = 1,5 D is worked into a flange in the device shown in Figure 2.12 until the outer diameter C of the flange attains the value prescribed for the product.
The radius r shall match that prescribed for the product.

回復此樓

» 猜你喜歡

323求調劑已經有6人回復
一志愿北京化工大學 070300 學碩 336分求調劑已經有4人回復
352求調劑已經有3人回復
一志愿東華大學化學070300，求調劑已經有8人回復
277材料科學與工程080500求調劑已經有7人回復
317求調劑已經有18人回復
293求調劑已經有5人回復
280分求調劑一志愿085802 已經有7人回復
0854電子信息求調劑已經有3人回復
263求調劑已經有4人回復

1樓 2014-07-09 17:19:56

已閱回復此樓關注TA 給TA發消息送TA紅花 TA的回帖

reko34

木蟲 (正式寫手)

翻譯EPI: 132
應助: 117 (高中生)
金幣: 4794.2
散金: 22
紅花: 12
帖子: 780
在線: 417.4小時
蟲號: 3055206
注冊: 2014-03-15
性別: GG
專業: 機械測試?yán)碚撆c技術

【答案】應助回帖

★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ...
真強必勝: 金幣+3, good 2014-07-10 11:26:24
huangguaha: 金幣+166, 翻譯EPI+1, ★★★★★最佳答案, 非常感謝~~ 2014-07-11 08:37:34

3. 環拉伸試驗
3.1 長度約15mm處的管截面應具有平而光滑的末端，應與管軸具有正確的角度。進行該試驗，在拉伸測試機上用2個直徑等于至少3倍管壁厚的銷拉伸管截面直到發生斷裂，見圖2.10。對于焊接管，試件放置在拉伸測試機時應使焊縫與拉伸載荷方向保持90°。
銷的速率不應超過5mm/s。
4. 擴口試驗
4.1 進行該試驗，將錐形擴孔器強行伸進試件，直到外徑增加到產品規定的C值，見圖2.11。試件的長度和擴孔器的錐角β如下表所示。錐體的進入速率不應超過50mm/s。

5. 翻邊試驗
5.1 進行該試驗，在圖2.12所示的裝置將一個長度=1.5D的管樣件加工成法蘭，直到法蘭的外徑C達到產品的規定值。
半徑r應符合產品規定。

贊一下

回復此樓

2樓2014-07-10 10:12:14