 |
 |
 |
 |
 |
 |
||
 |
 |
 |
 |
 |
| 2 | 1/1 | 返回列表 |
| 查看: 2106 | 回復: 1 | ||
zdy_derive新蟲 (初入文壇)
|
[求助]
跪求大神看看這個命令流哪里有問題，好人一生平安�。。�！ 已有1人參與
|
|
命令流如下： finish /clear /PREP7 !* ET,1,SOLID45 ET,2,SOLID65 et,3,SOLID65 !* MP,EX,1,4800 MP,EY,1,4800 MP,EZ,1,51500 MP,PRXY,1,0.02 MP,PRYZ,1,0.02 MP,PRXZ,1,0.27 MP,GXY,1,2353 MP,GYZ,1,2353 MP,GXZ,1,20275 mp,ex,2,20000 mp,nuxy,2,0.25 tb,concr,2 tbdata,,,,2,20 mp,ex,3,1.5e4 mp,nuxy,3,0.2 tb,dp,3 tbdata,1,4,30,10 r,1$r,2$r,3 ! CYLIND,16,0,-300,1500,0,90, CYLIND,50,16,0,1500,0,90, CYLIND,500,50,0,1500,0,90, ! allsel,all vsel,s,,,1 aslv,s lsla,s lplot lesize,1,,,4 lesize,2,,,4 lesize,3,,,6 lesize,4,,,6 lesize,5,,,4 lesize,6,,,4 lesize,7,25 lesize,8,25 lesize,9,25 type,1 mat,1 real,1 mshape,0,3d mshkey,0 vsweep,all !* ! allsel,all vsel,s,,,2 aslv,s lsla,s lplot lesize,10,,,4 lesize,11,,,6 lesize,12,,,4 lesize,13,,,6 lesize,14,,,6 lesize,15,,,4 lesize,16,,,6 lesize,17,,,4 lesize,18,25 lesize,19,25 lesize,20,25 lesize,21,25 type,2 mat,2 real,2 mshape,0,3d mshkey,0 vsweep,all !* ! allsel,all vsel,s,,,3 aslv,s lsla,s lplot lesize,23,,,6 lesize,25,,,6 lesize,26,,,6 lesize,28,,,6 lesize,22,50 lesize,24,50 lesize,27,50 lesize,29,50 lesize,30,50 lesize,31,50 lesize,32,50 lesize,33,50 type,3 mat,3 real,3 mshape,0,3d mshkey,0 vsweep,all !* allsel,all ! save ! ! mp,mu,4,0.4 ! 修改 mat,4 r,4,4 real,4 et,4,170 et,5,174 KEYOPT,5,9,0 KEYOPT,5,10,2 nropt,unsym ! 不對稱矩陣完全牛頓—拉普森法 !*generate the target sunface allsel,all asel,s,,,9 cm,target1,area type,4 nsla,s,1 esln,s,0 esurf !*generate the contact sunface asel,s,,,3 cm,contact1,area type,5 nsla,s,1 esln,s,0 esurf ! allsel,all eplot ! !*CONTACT PAIR CREATION - END mp,mu,5,0.7 ! 修改 mat,5 r,5,4 real,5 et,6,170 et,7,174 KEYOPT,7,9,0 KEYOPT,7,10,2 nropt,unsym !*generate the target sunface allsel,all asel,s,,,15 cm,target2,area type,6 nsla,s,1 esln,s,0 esurf !*generate the contact sunface asel,s,,,8 cm,contact2,area type,7 nsla,s,1 esln,s,0 esurf ! allsel,all eplot !*CONTACT PAIR CREATION - END save ! !* /solu da,4,symm !對稱約束 da,5,symm da,10,symm da,11,symm da,16,symm da,17,symm da,13,all da,14,all da,7,all ! antype,0 nlgeom,1 !大變形 autots,on !自動時間步 neqit,50 !子步最大迭代次數 pred,on !非線性分析預測器（加速收斂） ! solcontrol,on,on ! nropt,full,,on !定義H法選項（270） nsubst,20,10000,2 !子步數 time,100 !時間 allsel,all solve !* nsubst,100,10000,10 outres,all,all autots,1 time,200 asel,s,loc,z,-300 sfa,all,,pres,-10 !修改荷載值 allsel,all solve 錯誤提示為： *** ERROR *** CP = 51.231 TIME= 12:26:52 The value of UZ at node 67 is 1.342765716E+09. It is greater than the current limit of 1000000. This generally indicates rigid body motion as a result of an unconstrained model. Verify that your model is properly constrained. *** ERROR *** CP = 51.387 TIME= 12:30:06 *** MESSAGE CONTINUATION ---- DIAGNOSTIC INFORMATION *** If one or more parts of the model are held together only by contact verify that the contact surfaces are closed. You can check contact status in the SOLUTION module for the converged solutions using CNCHECK. *** ERROR *** CP = 51.480 TIME= 12:30:22 *** MESSAGE CONTINUATION ---- DIAGNOSTIC INFORMATION *** Rigid body motion can also occur when net section yielding has occurred resulting in large displacements for small increments of load or when buckling has occurred. You can plot the time history curve for node 67 in the UZ direction to check for stiffness (slope of the curve) approaching zero. |
回復此樓» 猜你喜歡
化學工程321分求調劑
已經有22人回復
-
322求調劑
已經有4人回復
-
考研調劑
已經有3人回復
-
326求調劑
已經有8人回復
-
333求調劑
已經有7人回復
-
一志愿東華大學控制學碩320求調劑
已經有3人回復
-
考研化學學碩調劑，一志愿985
已經有7人回復
-
0703化學調劑
已經有15人回復
-
0703化學調劑 ，六級已過，有科研經歷
已經有14人回復
-
326求調劑
已經有4人回復
Captain_DYX
新蟲 (初入文壇)
- 應助: 1 (幼兒園)
- 帖子: 1
- 在線: 17分鐘
- 蟲號: 4347595
- 注冊: 2016-01-10
2樓2016-01-10 23:00:02
相關版塊跳轉
我要訂閱樓主 zdy_derive 的主題更新
| 2 | 1/1 | 返回列表 |
| 最具人氣熱帖推薦 [查看全部] | 作者 | 回/看 | 最后發表 | |
|---|---|---|---|---|
|
[考研] 0703化學調劑 +11 | 妮妮ninicgb 2026-03-15 | 15/750 |
|
|---|---|---|---|---|
|
|
[考研] 求調劑 +4 | 要好好無聊 2026-03-21 | 4/200 |
|
|
[考研] 313求調劑 +4 | 肆叁貳壹22 2026-03-19 | 4/200 |
|
|
|
[考研] 一志愿西安交通大學材料工程專業 282分求調劑 +8 | 楓橋ZL 2026-03-18 | 10/500 |
|
|
|
[考研] 279求調劑 +5 | 紅衣隱官 2026-03-21 | 5/250 |
|
|
|
[考研] 346求調劑[0856] +4 | WayneLim327 2026-03-16 | 7/350 |
|
|
|
[考研] 機械專碩299求調劑至材料 +3 | kkcoco25 2026-03-16 | 4/200 |
|
|
|
[考研] 299求調劑 +6 | △小透明* 2026-03-17 | 6/300 |
|
|
|
[考研] 311求調劑 +5 | 冬十三 2026-03-18 | 5/250 |
|
|
|
[考研] 一志愿 西北大學 ，070300化學學碩，總分287，雙非一本，求調劑。 +4 | 晨昏線與星海 2026-03-19 | 4/200 |
|
|
|
[考研] 298-一志愿中國農業大學-求調劑 +9 | 手機用戶 2026-03-17 | 9/450 |
|
|
|
[考研] 一志愿中國海洋大學，生物學，301分，求調劑 +5 | 1孫悟空 2026-03-17 | 6/300 |
|
|
|
[考博] 申博26年 +3 | 八6八68 2026-03-19 | 3/150 |
|
|
|
[考研] 一志愿福大288有機化學，求調劑 +3 | 小木蟲200408204 2026-03-18 | 3/150 |
|
|
|
[考研] 【同濟軟件】軟件（085405）考研求調劑 +3 | 2026eternal 2026-03-18 | 3/150 |
|
|
|
[考研] 277調劑 +5 | 自由煎餅果子 2026-03-16 | 6/300 |
|
|
|
[考研] 326求調劑 +5 | 上岸的小葡 2026-03-15 | 6/300 |
|
|
|
[考研] 290求調劑 +3 | p asserby. 2026-03-15 | 4/200 |
|
|
|
[考研] 283求調劑 +3 | 聽風就是雨； 2026-03-16 | 3/150 |
|
|
|
[考研] 070300化學學碩求調劑 +6 | 太想進步了0608 2026-03-16 | 6/300 |
|