 |
 |
 |
 |
 |
 |
||
 |
 |
 |
 |
 |
| 5 | 1/1 | 返回列表 |
| 查看: 1303 | 回復: 13 | |||
| 本帖產生 1 個 翻譯EPI ，點擊這里進行查看 | |||
| 當前只顯示滿足指定條件的回帖，點擊這里查看本話題的所有回帖 | |||
jfr_1983金蟲 (小有名氣)
|
[交流]
摘要修改
|
||
|
It’s one of the key approaches for iron and steel corporations to efficiently recover the waste heat resources which are used to preheat sinter mixture in order to reduce energy consumption in the sintering process before the ignition device. Centered on the thermal performance of the sinter mixture in the drying process, mechanistic experiments such as differential thermal gravimetric analysis，forced air drying and the tunnel flashing drying, which are based on different focus, are carried out, including a series of experiments of level 10mg, level 10g, and level 100g respectively. The experimental results show that sinter mixture is a typical “three-period” drying materials, that is, the entire drying process consists of shorter rising rate period，longer constant rate period and falling rate period. At the beginning, the drying rate is faster, and then slower. Greater drying rate and the corresponding drying time is in the first 5-7 minutes when the moisture content of sinter mixture is 0.055~0.06kg (water)/kg (material) based on the experimental conditions. In the experiment of tunnel flashing drying, critical moisture content of sinter mixture is about 2.3~3.0%. The temperature and flow rate of hot air are the main factors affect the drying rate, within a certain range, the higher the air temperature the greater the flow as well as the drying rate, the effect of strengthening drying is more obvious. Both hot air temperature and flow should have an appropriate scope dues to the discrepancies exist in the effect of strengthening drying by improving the temperature and flow in different interval. Therefore, sinter mixture is easy to dry, and the existing low temperature waste heat is able to achieve sinter mixture’ drying. 求助 摘要修改~�。≈x謝 |
回復此樓» 猜你喜歡
【求調劑】新能源材料本科，一志愿211，初試321
已經有3人回復
-
材料考研調劑
已經有3人回復
-
材料調劑
已經有12人回復
-
英一數一408，總分284，二戰真誠求調劑
已經有14人回復
-
085410 一志愿211 22408分?jǐn)?shù)359求調劑
已經有4人回復
-
271求調劑
已經有19人回復
-
385分 生物學（071000）求調劑
已經有3人回復
-
一志愿安徽大學計算機科學與技術學碩，331分求調劑
已經有3人回復
-
318求調劑，計算材料方向
已經有8人回復
-
291求調劑
已經有25人回復
9樓2010-05-26 11:26:56
laobendan2
鐵蟲 (小有名氣)
- 翻譯EPI: 1
- 應助: 0 (幼兒園)
- 金幣: -13
- 帖子: 55
- 在線: 1.4小時
- 蟲號: 994753
- 注冊: 2010-04-12
★ ★ ★
sirljz(金幣+1):謝謝交流 2010-05-10 20:30:39
sirljz(金幣+2):歡迎新蟲 2010-05-10 20:30:52
jfr_1983(金幣+5):請?jiān)賻臀铱纯次倚薷牡牡诙�，謝謝 2010-05-22 11:25:14
sirljz(金幣+1):謝謝交流 2010-05-10 20:30:39
sirljz(金幣+2):歡迎新蟲 2010-05-10 20:30:52
jfr_1983(金幣+5):請?jiān)賻臀铱纯次倚薷牡牡诙�，謝謝 2010-05-22 11:25:14
| in order to reduce energy consumption， efficiently recover the waste heat which are used to preheat sinter mixturein before the ignition device. mechanistic experiments such as differential thermal gravimetric analysis，forced air drying and the tunnel flashing drying are carried out, including a series of experiments of level 10mg, level 10g, and level 100g respectively. The experimental results show that sinter mixture is a typical “three-period” drying materials, the entire drying process consists of shorter rising rate period，longer constant rate period and falling rate period. Greater drying rate and the corresponding drying time is in the first 5-7 minutes when the moisture content of sinter mixture is 0.055~0.06kg (water)/kg (material) based on the experimental conditions. In the experiment of tunnel flashing drying, critical moisture content of sinter mixture is about 2.3~3.0%. The temperature and flow rate of hot air are the main factors affect the drying rate, within a certain range, the higher the air temperature the greater the flow as well as the drying rate, the effect of strengthening drying is more obvious. Both hot air temperature and flow should have an appropriate scope dues to the discrepancies exist in the effect of strengthening drying by improving the temperature and flow in different interval. |
2樓2010-05-10 15:33:20
★ ★
sirljz(金幣+2):謝謝交流 2010-05-10 20:31:17
jfr_1983(金幣+5, 翻譯EPI+1):請?jiān)賻臀铱纯�，我又改了第二�?2010-05-22 11:24:34
sirljz(金幣+2):謝謝交流 2010-05-10 20:31:17
jfr_1983(金幣+5, 翻譯EPI+1):請?jiān)賻臀铱纯�，我又改了第二�?2010-05-22 11:24:34
| 大概改了一下，摘要中要用過去式，還有，樓主用的長句子太多，最好長短穿插。In order to reduce energy consumption in the sintering process before the ignition device， one of the key approaches for iron and steel corporations to efficiently recover the waste heat resources used to preheat sinter mixture. Centered on the thermal performance of the sinter mixture in the drying process, mechanistic experiments such as differential thermal gravimetric analysis，forced air drying and the tunnel flashing drying based on different focus, are carried out, including a series of experiments of level 10mg, level 10g, and level 100g(,) respectively. The experimental results show(ed) that sinter mixture is（was） a typical “three-period” drying materials, that is, the entire drying process consists（ed） of shorter rising rate period，longer constant rate period and falling rate period. At the beginning, the drying rate is faster(fast), and then slower(slow down). Greater drying rate and the corresponding drying time is in the first 5-7 minutes when the moisture content of sinter mixture is 0.055~0.06kg (water)/kg (material) based on the experimental conditions. In the experiment of tunnel flashing drying, critical moisture content of sinter mixture is about 2.3~3.0%. The temperature and flow rate of hot air are the main factors affect the drying rate, within a certain range, the higher the air temperature (is,) the greater the flow as well as the drying rate, the effect of strengthening drying is more obvious. Both hot air temperature and flow should have an appropriate scope dues to the discrepancies exist in the effect of strengthening drying by improving the temperature and flow in different interval(s). Therefore, sinter mixture is easy to dry, and the existing low temperature waste heat is able to achieve sinter mixture’ drying. |
3樓2010-05-10 16:59:49
jfr_1983
金蟲 (小有名氣)
- 應助: 0 (幼兒園)
- 金幣: 1043.5
- 散金: 10
- 帖子: 227
- 在線: 56.1小時
- 蟲號: 703484
- 注冊: 2009-02-18
- 專業: 金屬材料的微觀結構
4樓2010-05-19 19:26:31
| 最具人氣熱帖推薦 [查看全部] | 作者 | 回/看 | 最后發表 | |
|---|---|---|---|---|
|
[考研] 301求調劑 +12 | A_JiXing 2026-04-01 | 12/600 |
|
|---|---|---|---|---|
|
|
[考研] 285求調劑 +11 | AZMK 2026-04-01 | 11/550 |
|
|
[考研] 材料求調劑 +7 | 呢呢妮妮 2026-04-01 | 7/350 |
|
|
|
[考研] 320分，材料與化工專業，求調劑 +14 | 一定上岸aaa 2026-03-27 | 18/900 |
|
|
|
[考研] 379求調劑 +3 | ?苦瓜不苦 2026-04-01 | 3/150 |
|
|
|
[考研] 085600，320分求調劑 +5 | 大饞小子 2026-04-01 | 6/300 |
|
|
|
[考研] 350求調劑 +7 | 阿佳～ 2026-03-31 | 7/350 |
|
|
|
[考研] 0856材料化工調劑 總分330 +18 | zhubinhao 2026-03-27 | 18/900 |
|
|
|
[考研] 調劑申請 +8 | 張張張張zy 2026-03-31 | 9/450 |
|
|
|
[考研] 求調劑：一志愿：南京大學 專業：0705 總分320 ，本科985，四六級已過 +3 | lfy760306 2026-03-31 | 3/150 |
|
|
|
[考研] 復試調劑 +7 | 雙馬尾痞老板2 2026-03-31 | 7/350 |
|
|
|
[考研] 315求調劑 +6 | akie... 2026-03-28 | 7/350 |
|
|
|
[考研] 求調劑 +8 | 11ggg 2026-03-30 | 8/400 |
|
|
|
[考研] 0703化學 +20 | 妮妮ninicgb 2026-03-27 | 20/1000 |
|
|
|
[考博] 材料專業申博 +5 | 杜雨婷dyt 2026-03-29 | 5/250 |
|
|
|
[考研] 求調劑 +10 | 張zz111 2026-03-27 | 11/550 |
|
|
|
[考研] 材料與化工304求B區調劑 +4 | 邱gl 2026-03-26 | 7/350 |
|
|
|
[考研] 081200-11408-276學碩求調劑 +6 | 崔wj 2026-03-26 | 6/300 |
|
|
|
[考研] 331環境科學與工程求調劑 +3 | 熠然好運氣 2026-03-27 | 3/150 |
|
|
|
[考研] 285求調劑 +4 | AZMK 2026-03-27 | 7/350 |
|