版塊導航: 正在加載中...

應《網絡安全法》要求，自2017年10月1日起，未進行實名認證將不得使用互聯網跟帖服務。為保障您的帳號能夠正常使用，請盡快對帳號進行手機號驗證，感謝您的理解與支持！

24小時熱門版塊排行榜

北京石油化工學院2026年研究生招生接收調劑公告

返回列表

jiushiwo0539

新蟲 (初入文壇)

應助: 0 (幼兒園)
金幣: 38.8
帖子: 18
在線: 5.1小時
蟲號: 1505078
注冊: 2011-11-22
專業: 機械結構強度學

[求助] ansys熱分析高斯熱源模型熱流密度施加不上去溫度場不發生變化

我用ansys做的熱分析，是對一個鋼板進行的熱流密度施加，但是熱流密度好像施加不上去，命令流能運行，但是用后處理器查看溫度場沒有變化，用時間歷程處理器查看加熱區某一節點的溫度場也沒有發生變化，不知道為什么，希望哪位高手能指點一下，具體命令流如下：
【我是剛注冊的號，金幣不多，望請見諒！】

我也附加傳了一份txt文本附件

finish
/clear
/filname,Fname
/title,FEM model of heating
/unit,SI

!**********************modeling******************************
/prep7
et,1,solid70    !3D熱實體
et,2,solid87    !三維10節點4面體熱單元
et,3,surf152    !接觸單元
keyopt,3,4,1
keyopt,3,8,1

!******************材料常數***********************************
MPTEMP,1,0,20,75,100,175,200
MPTEMP,7,225,300,325,375,400,450
MPTEMP,13,475,500,550,575,600,675
MPTEMP,19,700,720,725,775,800,900
MPTEMP,25,1000,1100,1200,1500

MPDATA,KXX,1,1,51.9,51.74,51.3,51.1,49.525,49
MPDATA,KXX,1,7,48.275,46.1,45.25,43.55,42.7,41.05
MPDATA,KXX,1,13,40.225,39.4,37.5,36.55,35.6,32.75
MPDATA,KXX,1,19,31.8,30.64,30.35,27.45,26,26.6
MPDATA,KXX,1,25,27.2,27.7,28.2,29.7

MPDATA,C,1,1,450,459.6,486,494.25,519,525.5
MPDATA,C,1,7,532,563.5,574,599,614.75,646.25
MPDATA,C,1,13,662,683.75,727.25,749,773.25,846
MPDATA,C,1,19,1139,1373.4,1432,950,931.03,855.17
MPDATA,C,1,25,779.31,703.45,627.59,400

MPDATA,DENS,1,1,7880,7880,7880,7880,7880,7800
MPDATA,DENS,1,7,7800,7800,7790,7790,7780,7750
MPDATA,DENS,1,13,7720,7710,7710,7710,7700,7700
MPDATA,DENS,1,19,7650,7650,7600,7600,7588,7500
MPDATA,DENS,1,25,7400,7320,7200,7258

MPDATA,EX,1,1,2.08e11,2.06e11,2.02e11,2.0e11,1.99e11,1.98e11
MPDATA,EX,1,7,1.92e11,1.9e11,1.87e11,1.86e11,1.85e11,1.8e11
MPDATA,EX,1,13,1.77e11,1.75e11,1.7e11,1.63e11,1.65e11,1.3e11
MPDATA,EX,1,19,1.2e11,1.38e11,1.35e11,0.9e11,0.8e11,0.6e11
MPDATA,EX,1,25,0.4e11,0.25e11,0.25e11,0.25e11

MPDATA,PRXY,1,1,0.29,0.29,0.3,0.31,0.325,0.33
MPDATA,PRXY,1,7,0.335,0.35,0.355,0.36,0.367,0.37
MPDATA,PRXY,1,13,0.38,0.39,0.395,0.4,0.405,0.42
MPDATA,PRXY,1,19,0.425,0.43,0.43,0.435,0.44,0.445
MPDATA,PRXY,1,25,0.45,0.475,0.475,0.475

MPDATA,ALPX,1,1,10e-6,10e-6,10e-6,11e-6,11e-6,11e-6
MPDATA,ALPX,1,7,11e-6,12e-6,12e-6,12e-6,12e-6,13e-6
MPDATA,ALPX,1,13e-6,13e-6,13e-6,14e-6,14e-6,14e-6,14e-6
MPDATA,ALPX,1,19,14e-6,14e-6,14e-6,14e-6,14e-6,14e-6
MPDATA,ALPX,1,25,14e-6,14e-6,15e-6,15e-6

block,0,500,0,400,0,-14    !plate
block,0,40,0,250,0,-14 !flame region 1
block,0,90,0,280,0,-14 !transition region 5
block,0,90,0,400,0,-14 !up left region 2
block,90,500,0,280,0,-14 !upper right rigion 3
boptn,keep,no    !布爾設置
vovl,all          !體分開
numcmp,kp          !壓縮代號
numcmp,line
numcmp,area
numcmp,volu

!*********************meshing************************
!meshing the flame rigion
type,1
lsel,s,line,,21,22,1
lsel,a,line,,5,8,3
lesize,all,8,,,1
lsel,s,line,,6,7,1
lsel,a,line,,23,24,2
lesize,all,8,,,1
lsel,s,line,,1,11,10
lesize,all,,,3,2
lsel,a,line,,9,10,1
lesize,all,,,3,0.5
lsel,all
vsel,s,volu,,1
vmesh,all
vsel,all

!meshing the linear rigion
type,1
lsel,s,line,,25,26,1
lsel,a,line,,39,40,1
lesize,all,30,,,1
lsel,a,line,,29,30,1
lesize,all,30,,,1
lsel,s,line,,13,14,1
lsel,a,line,,33,34,1
lesize,all,30,,,1
lsel,s,line,,12,15,3
lsel,a,line,,27,28,1
lesize,all,40,,,1
lsel,s,line,,31,32,1
lsel,a,line,,37,38,1
lesize,all,40,,,1
lsel,s,line,,35,36,1
lesize,all,40,,,1
lsel,all
vsel,s,volu,,2,4,1
vmesh,all
vsel,all

!meshing the transition region    !過渡網格劃分
type,2
lsel,s,line,,43,44,1
lesize,all,,,2,1
lsel,s,line,,41,42,1
lesize,all,,,3,1
mopt,expnd,1.5
mopt,tetexpnd,2
mopt,trans,1.5
lsel,all
vsel,s,volu,,5
vmesh,all
vsel,all
!表面有效單元的劃分
type,3
asel,s,area,,8
amesh,all
asel,all
numcmp,node
numcmp,elem

save
finish

!****************施加熱流 heating flux  *********************

finish
/clear
resume,Fname,db
/filname,Fname1
/title,termperature filed of heating

*set,vatl,817.3                            !flow rate of acetylene(l/h)
*set,ata,0.29                               !heat transfer efficiency
*set,v,4                                  !flame moving speed
*set,tmptint,23                            !initial temperature
*set,k,3/40/40                         !for heating source
*set,q0,k*ata*11470*4.184*vatl/3600/3.1416
*set,timestep,8/v                            !time step length(time stayed on each element)
*set,tend,210/v                         !the end time of heating

!************************** define components ******************
!define the node component of flame region.
asel,s,area,,8                         !upper flame area.
nsla,s,1                               !all nodes.
cm,flmrg,node                         !flame region component

!define the upper surface
asel,s,area,,12,17,5
asel,a,area,,22,26,4                   !upper surface except flame area.
nsla,s,1                               !all nodes
cm,upsfc,node
!define the whole upper surface
cmsel,s,flmrg
cmsel,a,upsfc
cm,whupsfc,node

!define the below surface
asel,s,area,,7,11,14
asel,a,area,,16,21,5
asel,a,area,,25                         !below surface.
nsla,s,1
cm,blsfc,node

!define the around surface
asel,s,area,,5,10,5
asel,a,area,,14,15,1
asel,a,area,,19,20,1
asel,a,area,,23                         !around surface.
nsla,s,1
cm,rdsfc,node

!define the 152 surface element component
esel,s,type,,3
cm,htflrg,elem                         !heat flux elements

!****************************  heating  ******************************
/solu
antype,TRANS

!solution setting
tunif,tmptint                         !uniform temperature for the fist load step
TREF,TMPTINT
nsubst,2,5,1                            !two substeps.
kbc,0                                  !ramped load.
outres,nsol,last                      !write node sesults at the last substep
outpr,all,none                         !none print out.
eqslv,sparse,le-5                      !pcg solver  精度設置

!**************************** ****************************
!load step loop during heating
*set,Tstart,0.01
*set,Tend,tend
*set,Tinc,timestep
*do,TM,Tstart,Tend,Tinc
   *set,xorg,0
   *set,yorg,v*(TM-Tstart)
   *set,zorg,0
   clocal,11,1,xorg,yorg,zorg
   *if,TM-Tstart,le,Tend,then       !flame heating
   csys,11
   !flame round
   *set,R0,40                         !the outside flame round radius
   *set,Rend,8                      !the inner flame round rsdius
   *set,Rinc,-8                   !flame round step.
   *do,r,R0,Rend,Rinc
   cmsel,s,flmrg                   !nodes in flame region surface.
   nsel,r,loc,x,0,r-0.05*8
   esln
   esel,r,type,,3
   *set,Rmid,r+Rinc/2
   sfe,all,,hflux,,q0*exp(-1*k*Rmid*Rmid)
   *enddo
   cmsel,s,flmrg
   nsel,r,loc,x,0,R0
   esln,s,1
   cm,flame,elem                   !current flame round
   cmsel,s,htflrg                   !surface 152 elelements
   cmsel,u,flame                   !non current flame region
   sfedel,all,,hflux                   !delete last flame load
*endif

!delete heat flux after the last flame heating step.
*if,TM-Tstrat,eq,Tend+timestep,then
   cmsel,s,flame
   sfedel,all,,hflux                !delete heat flux
*endif

   allsel
   time,TM
   csys,0
   solve
*enddo

回復此樓

» 本帖附件資源列表

歡迎監督和反饋：小木蟲僅提供交流平臺，不對該內容負責。
本內容由用戶自主發布，如果其內容涉及到知識產權問題，其責任在于用戶本人，如對版權有異議，請聯系郵箱：xiaomuchong@tal.com
附件 1 : 熱流施加 1.txt

2012-05-11 16:06:23, 7.07 K

» 猜你喜歡

一志愿哈爾濱工業大學材料與化工方向336分已經有5人回復
0856材料化工調劑總分330 已經有9人回復
085602 化工專碩 338分求調劑已經有9人回復
352分化工與材料已經有4人回復
求調劑已經有8人回復
材料求調劑一志愿哈工大總分298分，前三科223分已經有3人回復
材料求調劑一志愿哈工大324 已經有4人回復
085600 286分材料求調劑已經有4人回復
求調劑已經有7人回復
275求調劑已經有10人回復

» 本主題相關商家推薦: (我也要在這里推廣)

1樓 2012-05-11 16:08:13

已閱回復此樓關注TA 給TA發消息送TA紅花 TA的回帖

智能機器人

Robot (super robot)

我們都愛小木蟲

找到一些相關的精華帖子，希望有用哦~

高斯計算的問題？？已經有5人回復
高斯 gaussian 在 windows7 中充分利用多核已經有19人回復
急求用高斯09怎么計算電子激發態 已經有7人回復
關于高斯穩定結構的問題已經有3人回復
高斯計算兩個有機分子已經有11人回復
高斯計算中分子軌道問題已經有6人回復
請問牛頓法和高斯牛頓法有什么不同？非常感謝已經有6人回復
fluent中的體熱源加載問題（實際上是熱流密度，不是熱生成率）已經有19人回復
在進行高斯計算時如何消去虛頻（轉載）已經有18人回復
高斯計算中zORA方法是否可以使用已經有9人回復
高斯中鍵伸縮力常數與鍵角力常數的計算已經有6人回復
dmol 中的GGA-RPBE相當于高斯中的什么計算方法？已經有5人回復
【求助】高斯計算過渡態不收斂，請問如何解決？已經有8人回復
【討論】ansys如何加載高斯分布的熱流密度？已經有13人回復

點擊這里搜索更多相關資源

科研從小木蟲開始，人人為我，我為人人

相關版塊跳轉 我要訂閱樓主 jiushiwo0539 的主題更新