 |
 |
 |
 |
 |
 |
||
 |
 |
 |
 |
 |
| 1 | 1/1 | 返回列表 |
| 查看: 470 | 回復: 0 | ||
calos818木蟲 (著名寫手)
新人菜鳥
|
[求助]
vasp5.2并行編譯成串行，請問怎么回事？
|
|
大家好，下面是我對vasp5.2.12進行并行編譯的makefile，編譯也產生vasp，但一mpirun 8核結果就是 serial version串行，同時OUTCAR最后出來對應8核的結果，請問怎么回事，麻煩幫看下謝謝！ .SUFFIXES: .inc .f .f90 .F #----------------------------------------------------------------------- # Makefile for Intel Fortran compiler for Pentium/Athlon/Opteron # bases systems # we recommend this makefile for both Intel as well as AMD systems # for AMD based systems appropriate BLAS and fftw libraries are # however mandatory (whereas they are optional for Intel platforms) # # The makefile was tested only under Linux on Intel and AMD platforms # the following compiler versions have been tested: # - ifc.7.1 works stable somewhat slow but reliably # - ifc.8.1 fails to compile the code properly # - ifc.9.1 recommended (both for 32 and 64 bit) # - ifc.10.1 partially recommended (both for 32 and 64 bit) # tested build 20080312 Package ID: l_fc_p_10.1.015 # the gamma only mpi version can not be compiles # using ifc.10.1 # # it might be required to change some of library pathes, since # LINUX installation vary a lot # Hence check ***ALL*** options in this makefile very carefully #----------------------------------------------------------------------- # # BLAS must be installed on the machine # there are several options: # 1) very slow but works: # retrieve the lapackage from ftp.netlib.org # and compile the blas routines (BLAS/SRC directory) # please use g77 or f77 for the compilation. When I tried to # use pgf77 or pgf90 for BLAS, VASP hang up when calling # ZHEEV (however this was with lapack 1.1 now I use lapack 2.0) # 2) more desirable: get an optimized BLAS # # the two most reliable packages around are presently: # 2a) Intels own optimised BLAS (PIII, P4, PD, PC2, Itanium) # http://developer.intel.com/software/products/mkl/ # this is really excellent, if you use Intel CPU's # # 2b) probably fastest SSE2 (4 GFlops on P4, 2.53 GHz, 16 GFlops PD, # around 30 GFlops on Quad core) # Kazushige Goto's BLAS # http://www.cs.utexas.edu/users/kgoto/signup_first.html # http://www.tacc.utexas.edu/resources/software/ # #----------------------------------------------------------------------- # all CPP processed fortran files have the extension .f90 SUFFIX=.f90 #----------------------------------------------------------------------- # fortran compiler and linker #----------------------------------------------------------------------- FC=ifort # fortran linker FCL=$(FC) #----------------------------------------------------------------------- # whereis CPP ?? (I need CPP, can't use gcc with proper options) # that's the location of gcc for SUSE 5.3 # # CPP_ = /usr/lib/gcc-lib/i486-linux/2.7.2/cpp -P -C # # that's probably the right line for some Red Hat distribution: # # CPP_ = /usr/lib/gcc-lib/i386-redhat-linux/2.7.2.3/cpp -P -C # # SUSE X.X, maybe some Red Hat distributions: CPP_ = ./preprocess <$*.F | /usr/bin/cpp -P -C -traditional >$*$(SUFFIX) #----------------------------------------------------------------------- # possible options for CPP: # NGXhalf charge density reduced in X direction # wNGXhalf gamma point only reduced in X direction # avoidalloc avoid ALLOCATE if possible # PGF90 work around some for some PGF90 / IFC bugs # CACHE_SIZE 1000 for PII,PIII, 5000 for Athlon, 8000-12000 P4, PD # RPROMU_DGEMV use DGEMV instead of DGEMM in RPRO (depends on used BLAS) # RACCMU_DGEMV use DGEMV instead of DGEMM in RACC (depends on used BLAS) #----------------------------------------------------------------------- CPP = $(CPP_) -DHOST=\"LinuxIFC\" \ -Dkind8 -DCACHE_SIZE=12000 -DPGF90 -Davoidalloc -DNGXhalf \ # -DRPROMU_DGEMV -DRACCMU_DGEMV #----------------------------------------------------------------------- # general fortran flags (there must a trailing blank on this line) # byterecl is strictly required for ifc, since otherwise # the WAVECAR file becomes huge #----------------------------------------------------------------------- FFLAGS = -FR -lowercase -assume byterecl #----------------------------------------------------------------------- # optimization # we have tested whether higher optimisation improves performance # -axK SSE1 optimization, but also generate code executable on all mach. # xK improves performance somewhat on XP, and a is required in order # to run the code on older Athlons as well # -xW SSE2 optimization # -axW SSE2 optimization, but also generate code executable on all mach. # -tpp6 P3 optimization # -tpp7 P4 optimization #----------------------------------------------------------------------- # ifc.9.1, ifc.10.1 recommended OFLAG=-O3 OFLAG_HIGH = $(OFLAG) OBJ_HIGH = OBJ_NOOPT = DEBUG = -FR -O0 INLINE = $(OFLAG) #----------------------------------------------------------------------- # the following lines specify the position of BLAS and LAPACK # VASP works fastest with the libgoto library # so that's what we recommend #----------------------------------------------------------------------- # mkl.10.0 # set -DRPROMU_DGEMV -DRACCMU_DGEMV in the CPP lines #BLAS=-L/opt/intel/mkl100/lib/em64t -lmkl -lpthread # even faster for VASP Kazushige Goto's BLAS # http://www.cs.utexas.edu/users/kgoto/signup_first.html # parallel goto version requires sometimes -libverbs BLAS=-L/share/apps/intel/mkl/lib/intel64/ -lmkl_intel_lp64 -lmkl_sequential -lmkl_core -lpthread # LAPACK, simplest use vasp.5.lib/lapack_double LAPACK=-L/home/pub/intel/mkl/lib/intel64 -lmkl_intel_lp64 -lmkl_sequential -lmkl_core -lpthread LAPACK=-L/share/apps/intel/mkl/lib/intel64/ -lmkl_intel_lp64 -lmkl_sequential -lmkl_core -lpthread # use the mkl Intel lapack #LAPACK= -lmkl_lapack #----------------------------------------------------------------------- LIB = -L../vasp.5.lib -ldmy \ ../vasp.5.lib/linpack_double.o $(LAPACK) \ $(BLAS) # options for linking, nothing is required (usually) LINK = #----------------------------------------------------------------------- # fft libraries: # VASP.5.2 can use fftw.3.1.X (http://www.fftw.org) # since this version is faster on P4 machines, we recommend to use it #----------------------------------------------------------------------- FFT3D = fft3dfurth.o fft3dlib.o # alternatively: fftw.3.1.X is slighly faster and should be used if available #FFT3D = fftw3d.o fft3dlib.o /opt/libs/fftw-3.1.2/lib/libfftw3.a #======================================================================= # MPI section, uncomment the following lines until # general rules and compile lines # presently we recommend OPENMPI, since it seems to offer better # performance than lam or mpich # # !!! Please do not send me any queries on how to install MPI, I will # certainly not answer them !!!! #======================================================================= #----------------------------------------------------------------------- # fortran linker for mpi #----------------------------------------------------------------------- FC=mpif90 FCL=$(FC) #----------------------------------------------------------------------- # additional options for CPP in parallel version (see also above): # NGZhalf charge density reduced in Z direction # wNGZhalf gamma point only reduced in Z direction # scaLAPACK use scaLAPACK (usually slower on 100 Mbit Net) #----------------------------------------------------------------------- #CPP = $(CPP_) -DMPI -DHOST=\"LinuxIFC\" -DIFC \ # -Dkind8 -DCACHE_SIZE=4000 -DPGF90 -Davoidalloc -DNGZhalf \ # -DMPI_BLOCK=8000 ## -DRPROMU_DGEMV -DRACCMU_DGEMV #----------------------------------------------------------------------- # location of SCALAPACK # if you do not use SCALAPACK simply leave that section commented out #----------------------------------------------------------------------- #BLACS=$(HOME)/archives/SCALAPACK/BLACS/ #SCA_=$(HOME)/archives/SCALAPACK/SCALAPACK #SCA= $(SCA_)/libscalapack.a \ # $(BLACS)/LIB/blacsF77init_MPI-LINUX-0.a $(BLACS)/LIB/blacs_MPI-LINUX-0.a $(BLACS)/LIB/blacsF77init_MPI-LINUX-0.a SCA= #----------------------------------------------------------------------- # libraries for mpi #----------------------------------------------------------------------- #LIB = -L../vasp.5.lib -ldmy \ # ../vasp.5.lib/linpack_double.o $(LAPACK) \ # $(SCA) $(BLAS) # FFT: fftmpi.o with fft3dlib of Juergen Furthmueller #FFT3D = fftmpi.o fftmpi_map.o fft3dfurth.o fft3dlib.o # alternatively: fftw.3.1.X is slighly faster and should be used if available #FFT3D = fftmpi.o fftmpi_map.o fftw3d.o fft3dlib.o /opt/libs/fftw-3.1.2/lib/libfftw3.a #----------------------------------------------------------------------- # general rules and compile lines #----------------------------------------------------------------------- BASIC= symmetry.o symlib.o lattlib.o random.o SOURCE= base.o mpi.o smart_allocate.o xml.o \ constant.o jacobi.o main_mpi.o scala.o \ asa.o lattice.o poscar.o ini.o xclib.o xclib_grad.o \ radial.o pseudo.o mgrid.o gridq.o ebs.o \ mkpoints.o wave.o wave_mpi.o wave_high.o \ $(BASIC) nonl.o nonlr.o nonl_high.o dfast.o choleski2.o \ mix.o hamil.o xcgrad.o xcspin.o potex1.o potex2.o \ metagga.o constrmag.o cl_shift.o relativistic.o LDApU.o \ paw_base.o egrad.o pawsym.o pawfock.o pawlhf.o paw.o \ mkpoints_full.o charge.o dipol.o pot.o \ dos.o elf.o tet.o tetweight.o hamil_rot.o \ steep.o chain.o dyna.o sphpro.o us.o core_rel.o \ aedens.o wavpre.o wavpre_noio.o broyden.o \ dynbr.o rmm-diis.o reader.o writer.o tutor.o xml_writer.o \ brent.o stufak.o fileio.o opergrid.o stepver.o \ chgloc.o fast_aug.o fock.o mkpoints_change.o sym_grad.o \ mymath.o internals.o dimer_heyden.o dvvtrajectory.o vdwforcefield.o \ hamil_high.o nmr.o force.o \ pead.o subrot.o subrot_scf.o pwlhf.o gw_model.o optreal.o davidson.o \ electron.o rot.o electron_all.o shm.o pardens.o paircorrection.o \ optics.o constr_cell_relax.o stm.o finite_diff.o elpol.o \ hamil_lr.o rmm-diis_lr.o subrot_cluster.o subrot_lr.o \ lr_helper.o hamil_lrf.o elinear_response.o ilinear_response.o \ linear_optics.o linear_response.o \ setlocalpp.o wannier.o electron_OEP.o electron_lhf.o twoelectron4o.o \ ratpol.o screened_2e.o wave_cacher.o chi_base.o wpot.o local_field.o \ ump2.o bse.o acfdt.o chi.o sydmat.o INC= vasp: $(SOURCE) $(FFT3D) $(INC) main.o rm -f vasp $(FCL) -o vasp main.o $(SOURCE) $(FFT3D) $(LIB) $(LINK) makeparam: $(SOURCE) $(FFT3D) makeparam.o main.F $(INC) $(FCL) -o makeparam $(LINK) makeparam.o $(SOURCE) $(FFT3D) $(LIB) zgemmtest: zgemmtest.o base.o random.o $(INC) $(FCL) -o zgemmtest $(LINK) zgemmtest.o random.o base.o $(LIB) dgemmtest: dgemmtest.o base.o random.o $(INC) $(FCL) -o dgemmtest $(LINK) dgemmtest.o random.o base.o $(LIB) ffttest: base.o smart_allocate.o mpi.o mgrid.o random.o ffttest.o $(FFT3D) $(INC) $(FCL) -o ffttest $(LINK) ffttest.o mpi.o mgrid.o random.o smart_allocate.o base.o $(FFT3D) $(LIB) kpoints: $(SOURCE) $(FFT3D) makekpoints.o main.F $(INC) $(FCL) -o kpoints $(LINK) makekpoints.o $(SOURCE) $(FFT3D) $(LIB) clean: -rm -f *.g *.f *.o *.L *.mod ; touch *.F main.o: main$(SUFFIX) $(FC) $(FFLAGS)$(DEBUG) $(INCS) -c main$(SUFFIX) xcgrad.o: xcgrad$(SUFFIX) $(FC) $(FFLAGS) $(INLINE) $(INCS) -c xcgrad$(SUFFIX) xcspin.o: xcspin$(SUFFIX) $(FC) $(FFLAGS) $(INLINE) $(INCS) -c xcspin$(SUFFIX) makeparam.o: makeparam$(SUFFIX) $(FC) $(FFLAGS)$(DEBUG) $(INCS) -c makeparam$(SUFFIX) makeparam$(SUFFIX): makeparam.F main.F # # MIND: I do not have a full dependency list for the include # and MODULES: here are only the minimal basic dependencies # if one strucuture is changed then touch_dep must be called # with the corresponding name of the structure # base.o: base.inc base.F mgrid.o: mgrid.inc mgrid.F constant.o: constant.inc constant.F lattice.o: lattice.inc lattice.F setex.o: setexm.inc setex.F pseudo.o: pseudo.inc pseudo.F poscar.o: poscar.inc poscar.F mkpoints.o: mkpoints.inc mkpoints.F wave.o: wave.inc wave.F nonl.o: nonl.inc nonl.F nonlr.o: nonlr.inc nonlr.F $(OBJ_HIGH): $(CPP) $(FC) $(FFLAGS) $(OFLAG_HIGH) $(INCS) -c $*$(SUFFIX) $(OBJ_NOOPT): $(CPP) $(FC) $(FFLAGS) $(INCS) -c $*$(SUFFIX) fft3dlib_f77.o: fft3dlib_f77.F $(CPP) $(F77) $(FFLAGS_F77) -c $*$(SUFFIX) .F.o: $(CPP) $(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX) .F$(SUFFIX): $(CPP) $(SUFFIX).o: $(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX) # special rules #----------------------------------------------------------------------- # these special rules are cummulative (that is once failed # in one compiler version, stays in the list forever) # -tpp5|6|7 P, PII-PIII, PIV # -xW use SIMD (does not pay of on PII, since fft3d uses double prec) # all other options do no affect the code performance since -O1 is used fft3dlib.o : fft3dlib.F $(CPP) $(FC) -FR -lowercase -O2 -c $*$(SUFFIX) fft3dfurth.o : fft3dfurth.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) radial.o : radial.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) symlib.o : symlib.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) symmetry.o : symmetry.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) wave_mpi.o : wave_mpi.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) wave.o : wave.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) dynbr.o : dynbr.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) asa.o : asa.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) broyden.o : broyden.F $(CPP) $(FC) -FR -lowercase -O2 -c $*$(SUFFIX) us.o : us.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) LDApU.o : LDApU.F $(CPP) $(FC) -FR -lowercase -O2 -c $*$(SUFFIX) |
回復此樓» 猜你喜歡
290求調劑
已經有3人回復
-
一志愿西南交通 專碩 材料355 本科雙非 求調劑
已經有4人回復
-
295復試調劑
已經有6人回復
-
279分求調劑 一志愿211
已經有8人回復
-
工科材料085601 279求調劑
已經有8人回復
-
317求調劑
已經有8人回復
-
一志愿南昌大學，327分，材料與化工085600
已經有5人回復
-
274求調劑
已經有7人回復
-
317求調劑
已經有9人回復
-
招收調劑碩士
已經有11人回復
找到一些相關的精華帖子，希望有用哦~
VASP5.2串行安裝出現的問題
已經有10人回復
- vasp 5.2 安裝過程 (串行+并行）+(32位+64位) + ifort +intel MKL+ openmpi
已經有47人回復
- vasp5.2 修改Makefile
已經有6人回復
- vasp串行，并行編譯成功，但很奇怪。
已經有23人回復
- 請問單機裝VASP，裝并行好還是串行好？
已經有15人回復
- vasp5.2 并行編譯 BLAS問題 求助
已經有4人回復
- vasp5.2并行版安裝最后一步，vasp編譯的最后一步失敗，救命啊�。�！
已經有22人回復
- VASP5.2版本并行安裝時出問題了，已經到最后一步了
已經有28人回復
- 緊急求助---VASP.5.2編譯
已經有16人回復
- vasp5.2如何計算DOS和band structure？
已經有10人回復
- 并行vasp運行問題
已經有10人回復
- VASP5.2 直接計算彈性常數
已經有52人回復
- vasp5.2光學計算中怎么加入scissor operation?
已經有13人回復
- vasp5.2 openmpi+intel+mkl編譯，能量正值問題
已經有7人回復
- VASP 5.2 集群編譯錯誤 undefined reference to `MAIN__'
已經有8人回復
- vasp5.2 并行編譯如何修改makefile
已經有5人回復
- vasp5.2的編譯問題 非常感謝 ！！
已經有14人回復
- 【求助成功】vasp5.2并行安裝不上
已經有18人回復
- 【分享】vasp2cif.f90 for vasp5.2
已經有4人回復
- 【求助】vasp5.2異常退出的問題
已經有16人回復
點擊這里搜索更多相關資源科研從小木蟲開始，人人為我，我為人人
相關版塊跳轉
我要訂閱樓主 calos818 的主題更新
| 1 | 1/1 | 返回列表 |
| 最具人氣熱帖推薦 [查看全部] | 作者 | 回/看 | 最后發表 | |
|---|---|---|---|---|
|
[考研] 290求調劑 +3 | ^O^乜 2026-03-19 | 3/150 |
|
|---|---|---|---|---|
|
[考研] 能源材料化學課題組招收碩士研究生8-10名 +5 | 脫穎而出 2026-03-16 | 14/700 |
|
|
|
[考研] 0856調劑，是學校就去 +7 | sllhht 2026-03-19 | 8/400 |
|
|
|
[考研] 求調劑 +3 | 暗涌afhb 2026-03-16 | 3/150 |
|
|
|
[論文投稿]
申請回稿延期一個月，編輯同意了。但系統上的時間沒變，給編輯又寫郵件了，沒回復
 10+3
|
wangf9518 2026-03-17 | 4/200 |
|
|
|
[考研] 一志愿南京理工大學085701資源與環境302分求調劑 +3 | 葵梓衛隊 2026-03-18 | 5/250 |
|
|
|
[考研] 321求調劑 +8 | 何潤采123 2026-03-18 | 10/500 |
|
|
|
[考研] 085600材料與化工求調劑 +6 | 緒幸與子 2026-03-17 | 6/300 |
|
|
|
[考研] 材料考研調劑 +3 | xwt。 2026-03-19 | 3/150 |
|
|
|
[考研] 一志愿985，本科211，0817化學工程與技術319求調劑 +10 | Liwangman 2026-03-15 | 10/500 |
|
|
|
[考研] 295求調劑 +3 | 一志愿京區211 2026-03-18 | 5/250 |
|
|
|
[考研] 308求調劑 +4 | 是Lupa啊 2026-03-16 | 4/200 |
|
|
|
[考研] 290求調劑 +3 | p asserby. 2026-03-15 | 4/200 |
|
|
|
[考研] 302求調劑 +4 | 小賈同學123 2026-03-15 | 8/400 |
|
|
|
[考研] 278求調劑 +3 | Yy7400 2026-03-13 | 3/150 |
|
|
|
[考研] 東南大學364求調劑 +5 | JasonYuiui 2026-03-15 | 5/250 |
|
|
|
[考研] 326求調劑 +4 | 諾貝爾化學獎覬?/a> 2026-03-15 | 7/350 |
|
|
|
[考研] 326求調劑 +3 | mlpqaz03 2026-03-15 | 3/150 |
|
|
|
[考研] 297一志愿上交085600求調劑 +5 | 指尖八千里 2026-03-14 | 5/250 |
|
|
|
[考研] 297求調劑 +4 | 學海漂泊 2026-03-13 | 4/200 |
|