 |
 |
 |
 |
 |
 |
||
 |
 |
 |
 |
 |
| 查看: 3297 | 回復: 14 | ||
[求助]
vasp5.2的編譯問題 非常感謝 ��！
|
|
我剛剛接觸vasp5.2，在編譯的時候出啦問題，望師兄師姐幫忙，謝謝了�。�！ 我的結果 thd@ubuntu:~/installed/vasp.5.2$ make cc -E cc: no input files make: *** [base.o] Error 1 makefile文件就是 .SUFFIXES: .inc .f .f90 .F #----------------------------------------------------------------------- # Makefile for Intel Fortran compiler for Pentium/Athlon/Opteron # bases systems # we recommend this makefile for both Intel as well as AMD systems # for AMD based systems appropriate BLAS and fftw libraries are # however mandatory (whereas they are optional for Intel platforms) # # The makefile was tested only under Linux on Intel and AMD platforms # the following compiler versions have been tested: # - ifc.7.1 works stable somewhat slow but reliably # - ifc.8.1 fails to compile the code properly # - ifc.9.1 recommended (both for 32 and 64 bit) # - ifc.10.1 partially recommended (both for 32 and 64 bit) # tested build 20080312 Package ID: l_fc_p_10.1.015 # the gamma only mpi version can not be compiles # using ifc.10.1 # # it might be required to change some of library pathes, since # LINUX installation vary a lot # Hence check ***ALL*** options in this makefile very carefully #----------------------------------------------------------------------- # # BLAS must be installed on the machine # there are several options: # 1) very slow but works: # retrieve the lapackage from ftp.netlib.org # and compile the blas routines (BLAS/SRC directory) # please use g77 or f77 for the compilation. When I tried to # use pgf77 or pgf90 for BLAS, VASP hang up when calling # ZHEEV (however this was with lapack 1.1 now I use lapack 2.0) # 2) more desirable: get an optimized BLAS # # the two most reliable packages around are presently: # 2a) Intels own optimised BLAS (PIII, P4, PD, PC2, Itanium) # http://developer.intel.com/software/products/mkl/ # this is really excellent, if you use Intel CPU's # # 2b) probably fastest SSE2 (4 GFlops on P4, 2.53 GHz, 16 GFlops PD, # around 30 GFlops on Quad core) # Kazushige Goto's BLAS # http://www.cs.utexas.edu/users/kgoto/signup_first.html # http://www.tacc.utexas.edu/resources/software/ # #----------------------------------------------------------------------- # MKLINCLUDE=/opt/intel/mkl/include/ # MKLPATH=/opt/intel/mkl/lib/ia32/ # all CPP processed fortran files have the extension .f90 SUFFIX=.f90 #----------------------------------------------------------------------- # fortran compiler and linker #----------------------------------------------------------------------- FC=ifort # fortran linker FCL=$(FC) #----------------------------------------------------------------------- # whereis CPP ?? (I need CPP, can't use gcc with proper options) # that's the location of gcc for SUSE 5.3 # # CPP_ = /usr/lib/gcc-lib/i486-linux/2.7.2/cpp -P -C # # that's probably the right line for some Red Hat distribution: # # CPP_ = /usr/lib/gcc-lib/i386-redhat-linux/2.7.2.3/cpp -P -C # # SUSE X.X, maybe some Red Hat distributions: CPP_ = ./preprocess <$*.F | /usr/bin/cpp -P -C -traditional >$*$(SUFFIX) #----------------------------------------------------------------------- # possible options for CPP: # NGXhalf charge density reduced in X direction # wNGXhalf gamma point only reduced in X direction # avoidalloc avoid ALLOCATE if possible # PGF90 work around some for some PGF90 / IFC bugs # CACHE_SIZE 1000 for PII,PIII, 5000 for Athlon, 8000-12000 P4, PD # RPROMU_DGEMV use DGEMV instead of DGEMM in RPRO (depends on used BLAS) # RACCMU_DGEMV use DGEMV instead of DGEMM in RACC (depends on used BLAS) #----------------------------------------------------------------------- # CPP = $(CPP_) -DHOST=\"LinuxIFC\" \ # -Dkind8 -DCACHE_SIZE=12000 -DPGF90 -Davoidalloc -DNGXhalf \ # -DRPROMU_DGEMV -DRACCMU_DGEMV #----------------------------------------------------------------------- # general fortran flags (there must a trailing blank on this line) # byterecl is strictly required for ifc, since otherwise # the WAVECAR file becomes huge #----------------------------------------------------------------------- FFLAGS = -FR -lowercase -assume byterecl #----------------------------------------------------------------------- # optimization # we have tested whether higher optimisation improves performance # -axK SSE1 optimization, but also generate code executable on all mach. # xK improves performance somewhat on XP, and a is required in order # to run the code on older Athlons as well # -xW SSE2 optimization # -axW SSE2 optimization, but also generate code executable on all mach. # -tpp6 P3 optimization # -tpp7 P4 optimization #----------------------------------------------------------------------- # ifc.9.1, ifc.10.1 recommended OFLAG=-O3 -xW -tpp7 OFLAG_HIGH = $(OFLAG) OBJ_HIGH = OBJ_NOOPT = DEBUG = -FR -O0 INLINE = $(OFLAG) #----------------------------------------------------------------------- # the following lines specify the position of BLAS and LAPACK # VASP works fastest with the libgoto library # so that's what we recommend #----------------------------------------------------------------------- # mkl.10.0 # set -DRPROMU_DGEMV -DRACCMU_DGEMV in the CPP lines #BLAS= /opt/intel/mkl/lib//em64t -lmkl -lpthread # even faster for VASP Kazushige Goto's BLAS # http://www.cs.utexas.edu/users/kgoto/signup_first.html # parallel goto version requires sometimes -libverbs BLAS= /opt/GotoBLAS2/libgoto2_penrynp-r1.13.so # LAPACK, simplest use vasp.5.lib/lapack_double LAPACK= ../vasp.5.lib/lapack_double.o # use the mkl Intel lapack #LAPACK= -lmkl_lapack #----------------------------------------------------------------------- LIB = -L../vasp.5.lib -ldmy \ ../vasp.5.lib/linpack_double.o $(LAPACK) \ $(BLAS) # options for linking, nothing is required (usually) LINK = #----------------------------------------------------------------------- # fft libraries: # VASP.5.2 can use fftw.3.1.X (http://www.fftw.org) # since this version is faster on P4 machines, we recommend to use it #----------------------------------------------------------------------- FFT3D = fft3dfurth.o fft3dlib.o # alternatively: fftw.3.1.X is slighly faster and should be used if available # FFT3D = fftw3d.o fft3dlib.o /opt/libs/fftw-3.1.2/lib/libfftw3.a #======================================================================= # MPI section, uncomment the following lines until # general rules and compile lines # presently we recommend OPENMPI, since it seems to offer better # performance than lam or mpich # # !!! Please do not send me any queries on how to install MPI, I will # certainly not answer them !!!! #======================================================================= #----------------------------------------------------------------------- # fortran linker for mpi #----------------------------------------------------------------------- #FC=mpif77 #FCL=$(FC) #----------------------------------------------------------------------- # additional options for CPP in parallel version (see also above): # NGZhalf charge density reduced in Z direction # wNGZhalf gamma point only reduced in Z direction # scaLAPACK use scaLAPACK (usually slower on 100 Mbit Net) #----------------------------------------------------------------------- # CPP = $(CPP_) -DMPI -DHOST=\"LinuxIFC\" -DIFC \ # -Dkind8 -DCACHE_SIZE=4000 -DPGF90 -Davoidalloc -DNGZhalf \ # -DMPI_BLOCK=8000 # -DRPROMU_DGEMV -DRACCMU_DGEMV #----------------------------------------------------------------------- # location of SCALAPACK # if you do not use SCALAPACK simply leave that section commented out #----------------------------------------------------------------------- #BLACS=$(HOME)/archives/SCALAPACK/BLACS/ #SCA_=$(HOME)/archives/SCALAPACK/SCALAPACK #SCA= $(SCA_)/libscalapack.a \ # $(BLACS)/LIB/blacsF77init_MPI-LINUX-0.a $(BLACS)/LIB/blacs_MPI-LINUX-0.a $(BLACS)/LIB/blacsF77init_MPI-LINUX-0.a SCA= #----------------------------------------------------------------------- # libraries for mpi #----------------------------------------------------------------------- #LIB = -L../vasp.5.lib -ldmy \ # ../vasp.5.lib/linpack_double.o $(LAPACK) \ # $(SCA) $(BLAS) # FFT: fftmpi.o with fft3dlib of Juergen Furthmueller FFT3D = fftmpi.o fftmpi_map.o fft3dfurth.o fft3dlib.o # alternatively: fftw.3.1.X is slighly faster and should be used if available #FFT3D = fftmpiw.o fftmpi_map.o fftw3d.o fft3dlib.o /opt/libs/fftw-3.1.2/lib/libfftw3.a #----------------------------------------------------------------------- # general rules and compile lines #----------------------------------------------------------------------- BASIC= symmetry.o symlib.o lattlib.o random.o SOURCE= base.o mpi.o smart_allocate.o xml.o \ constant.o jacobi.o main_mpi.o scala.o \ asa.o lattice.o poscar.o ini.o xclib.o xclib_grad.o \ radial.o pseudo.o mgrid.o gridq.o ebs.o \ mkpoints.o wave.o wave_mpi.o wave_high.o \ $(BASIC) nonl.o nonlr.o nonl_high.o dfast.o choleski2.o \ mix.o hamil.o xcgrad.o xcspin.o potex1.o potex2.o \ constrmag.o cl_shift.o relativistic.o LDApU.o \ paw_base.o metagga.o egrad.o pawsym.o pawfock.o pawlhf.o rhfatm.o paw.o \ mkpoints_full.o charge.o dipol.o pot.o \ dos.o elf.o tet.o tetweight.o hamil_rot.o \ steep.o chain.o dyna.o sphpro.o us.o core_rel.o \ aedens.o wavpre.o wavpre_noio.o broyden.o \ dynbr.o rmm-diis.o reader.o writer.o tutor.o xml_writer.o \ brent.o stufak.o fileio.o opergrid.o stepver.o \ chgloc.o fast_aug.o fock.o mkpoints_change.o sym_grad.o \ mymath.o internals.o dimer_heyden.o dvvtrajectory.o vdwforcefield.o \ hamil_high.o nmr.o force.o \ pead.o subrot.o subrot_scf.o pwlhf.o gw_model.o optreal.o davidson.o \ electron.o rot.o electron_all.o shm.o pardens.o paircorrection.o \ optics.o constr_cell_relax.o stm.o finite_diff.o elpol.o \ hamil_lr.o rmm-diis_lr.o subrot_cluster.o subrot_lr.o \ lr_helper.o hamil_lrf.o elinear_response.o ilinear_response.o \ linear_optics.o linear_response.o \ setlocalpp.o wannier.o electron_OEP.o electron_lhf.o twoelectron4o.o \ ratpol.o screened_2e.o wave_cacher.o chi_base.o wpot.o local_field.o \ ump2.o bse.o acfdt.o chi.o sydmat.o INC= vasp: $(SOURCE) $(FFT3D) $(INC) main.o rm -f vasp $(FCL) -o vasp main.o $(SOURCE) $(FFT3D) $(LIB) $(LINK) makeparam: $(SOURCE) $(FFT3D) makeparam.o main.F $(INC) $(FCL) -o makeparam $(LINK) makeparam.o $(SOURCE) $(FFT3D) $(LIB) zgemmtest: zgemmtest.o base.o random.o $(INC) $(FCL) -o zgemmtest $(LINK) zgemmtest.o random.o base.o $(LIB) dgemmtest: dgemmtest.o base.o random.o $(INC) $(FCL) -o dgemmtest $(LINK) dgemmtest.o random.o base.o $(LIB) ffttest: base.o smart_allocate.o mpi.o mgrid.o random.o ffttest.o $(FFT3D) $(INC) $(FCL) -o ffttest $(LINK) ffttest.o mpi.o mgrid.o random.o smart_allocate.o base.o $(FFT3D) $(LIB) kpoints: $(SOURCE) $(FFT3D) makekpoints.o main.F $(INC) $(FCL) -o kpoints $(LINK) makekpoints.o $(SOURCE) $(FFT3D) $(LIB) clean: -rm -f *.g *.f *.o *.L *.mod ; touch *.F main.o: main$(SUFFIX) $(FC) $(FFLAGS)$(DEBUG) $(INCS) -c main$(SUFFIX) xcgrad.o: xcgrad$(SUFFIX) $(FC) $(FFLAGS) $(INLINE) $(INCS) -c xcgrad$(SUFFIX) xcspin.o: xcspin$(SUFFIX) $(FC) $(FFLAGS) $(INLINE) $(INCS) -c xcspin$(SUFFIX) makeparam.o: makeparam$(SUFFIX) $(FC) $(FFLAGS)$(DEBUG) $(INCS) -c makeparam$(SUFFIX) makeparam$(SUFFIX): makeparam.F main.F # # MIND: I do not have a full dependency list for the include # and MODULES: here are only the minimal basic dependencies # if one strucuture is changed then touch_dep must be called # with the corresponding name of the structure # base.o: base.inc base.F mgrid.o: mgrid.inc mgrid.F constant.o: constant.inc constant.F lattice.o: lattice.inc lattice.F setex.o: setexm.inc setex.F pseudo.o: pseudo.inc pseudo.F poscar.o: poscar.inc poscar.F mkpoints.o: mkpoints.inc mkpoints.F wave.o: wave.F nonl.o: nonl.inc nonl.F nonlr.o: nonlr.inc nonlr.F $(OBJ_HIGH): $(CPP) $(FC) $(FFLAGS) $(OFLAG_HIGH) $(INCS) -c $*$(SUFFIX) $(OBJ_NOOPT): $(CPP) $(FC) $(FFLAGS) $(INCS) -c $*$(SUFFIX) fft3dlib_f77.o: fft3dlib_f77.F $(CPP) $(F77) $(FFLAGS_F77) -c $*$(SUFFIX) .F.o: $(CPP) $(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX) .F$(SUFFIX): $(CPP) $(SUFFIX).o: $(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX) # special rules #----------------------------------------------------------------------- # these special rules are cummulative (that is once failed # in one compiler version, stays in the list forever) # -tpp5|6|7 P, PII-PIII, PIV # -xW use SIMD (does not pay of on PII, since fft3d uses double prec) # all other options do no affect the code performance since -O1 is used fft3dlib.o : fft3dlib.F $(CPP) $(FC) -FR -lowercase -O2 -c $*$(SUFFIX) fft3dfurth.o : fft3dfurth.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) fftw3d.o : fftw3d.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) wave_high.o : wave_high.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) radial.o : radial.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) symlib.o : symlib.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) symmetry.o : symmetry.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) wave_mpi.o : wave_mpi.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) wave.o : wave.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) dynbr.o : dynbr.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) asa.o : asa.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) broyden.o : broyden.F $(CPP) $(FC) -FR -lowercase -O2 -c $*$(SUFFIX) us.o : us.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) LDApU.o : LDApU.F $(CPP) $(FC) -FR -lowercase -O2 -c $*$(SUFFIX) 由于我也是剛剛注冊的小米蟲，所以沒有金幣，敬請多多包涵！��！ |
回復此樓» 猜你喜歡
286分人工智能專業請求調劑愿意跨考！
已經有5人回復
-
279求調劑
已經有3人回復
-
336求調劑
已經有3人回復
-
286求調劑
已經有3人回復
-
一志愿華中科技大學071000，求調劑
已經有3人回復
-
279分求調劑 一志愿211
已經有14人回復
-
332求調劑
已經有3人回復
-
0856材料專碩353求調劑
已經有3人回復
-
材料學學碩080502 337求調劑-一志愿華中科技大學
已經有5人回復
-
085601調劑 358分
已經有4人回復
» 本主題相關價值貼推薦，對您同樣有幫助:
- vasp跨節點運行出錯，mpiexec_node-1 (handle_stdin_input 1089)
已經有5人回復
- vasp5.2 openmpi+intel+mkl編譯，能量正值問題
已經有7人回復
- vasp5.2計算半導體Si光學性質的總結
已經有106人回復
- vasp5.2編譯完成沒有問題，但是在運行時出現killed by signal 11，請問是什么原因？
已經有4人回復
- 求VASP4.6的編譯文件_基于ifort編譯器和atlas數學庫
已經有10人回復
- 【求助完成】提交vasp時出現以下錯誤，請大家?guī)兔聪?/a>
已經有5人回復
- 【求助】Segmentation fault
已經有15人回復
- 【求助】請教vasp的問題
已經有4人回復
- 【求助】VASP5.2 編譯出錯make: *** [vasp] 錯誤 1,請大家?guī)兔Ψ治龇治?謝謝
已經有7人回復
- 【求助】vasp無法并行計算
已經有25人回復
- 【求助】vasp優化團簇出錯 求Pd的INCAR文件
已經有21人回復
- 【求助】VASP 編譯出錯
已經有24人回復
- 【求助】vasp5.2異常退出的問題
已經有16人回復
2樓2011-05-13 23:25:23
3樓2011-05-14 11:46:11
liuds7792
金蟲 (小有名氣)
- 應助: 0 (幼兒園)
- 金幣: 1007.5
- 散金: 58
- 帖子: 213
- 在線: 58.6小時
- 蟲號: 164900
- 注冊: 2006-01-12
- 性別: GG
- 專業: 凝聚態物性 II ：電子結構
4樓2011-05-14 12:22:27
enola
捐助貴賓 (正式寫手)
- 1ST強帖: 2
- 應助: 13 (小學生)
- 金幣: 1485.9
- 散金: 1549
- 紅花: 14
- 帖子: 847
- 在線: 102.5小時
- 蟲號: 947564
- 注冊: 2010-01-24
- 專業: 半導體光電子器件
【答案】應助回帖
★ ★
mazuju028(金幣+2): 謝謝交流 2011-05-15 13:21:19
tuhaidan(金幣+1): 2011-05-18 09:46:40
mazuju028(金幣+2): 謝謝交流 2011-05-15 13:21:19
tuhaidan(金幣+1): 2011-05-18 09:46:40
|
1.首先確認你的庫安裝好啦。which icc， which ifort都要對 2.其次呢，在vasp.x.x.lib里要先編譯。把makefile_Linux_Intel復制成makefile，并且把ifc改成ifort。 3.接下來到vasp.x.x文件夾，復制makefile_Linux_Intel成makefile，修改參數，然后再編譯。 （建議，先看看小木蟲上前輩們的介紹） 不知道你是不是要編譯并行的啊。。不是的話就不要修改# fortran linker for mpi 以下的內容。 祝你成功 |
5樓2011-05-15 12:49:49
gavinliu7390
木蟲 (著名寫手)
葉落鷹飛
- 1ST強帖: 3
- 應助: 51 (初中生)
- 貴賓: 0.481
- 金幣: 1564.7
- 散金: 2975
- 紅花: 34
- 帖子: 1278
- 在線: 241.4小時
- 蟲號: 675997
- 注冊: 2008-12-17
- 性別: GG
- 專業: 凝聚態物性I:結構、力學和
6樓2011-05-17 00:20:02
|
您好，我的電腦是雙核的，串行，并行，是不是，可以選擇的��？我做的事第一行原理的計算，我應該選那種��？ /opt/intel/composerxe-2011.3.174/bin/ia32/icc /opt/intel/composerxe-2011.3.174/bin/ia32/ifort 這是我的 vasp.5.lib的makefile .SUFFIXES: .inc .f .F #----------------------------------------------------------------------- # Makefile for Portland Group F90/HPF compiler # the makefile was tested only under Linux on Intel platforms # however it might work on other platforms as well # # this release of vasp.4.lib contains lapack v2.0 # this can be compiled with pgf90 compiler if the option -O1 is used # # Mind: one user reported that he had to copy preclib.F diolib.F # dlexlib.F and drdatab.F to the directory vasp.4.4, compile the files # there and link them directly into vasp # for no obvious reason these files could not be linked from the library # #----------------------------------------------------------------------- # C-preprocessor CPP = gcc -E -P -C $*.F >$*.f FC=ifort CFLAGS = -O FFLAGS = -O0 -FI FREE = -FR DOBJ = preclib.o timing_.o derrf_.o dclock_.o diolib.o dlexlib.o drdatab.o #----------------------------------------------------------------------- # general rules #----------------------------------------------------------------------- libdmy.a: $(DOBJ) lapack_double.o linpack_double.o lapack_atlas.o -rm libdmy.a ar vq libdmy.a $(DOBJ) # files which do not require autodouble lapack_min.o: lapack_min.f $(FC) $(FFLAGS) $(NOFREE) -c lapack_min.f lapack_double.o: lapack_double.f $(FC) $(FFLAGS) $(NOFREE) -c lapack_double.f lapack_single.o: lapack_single.f $(FC) $(FFLAGS) $(NOFREE) -c lapack_single.f lapack_atlas.o: lapack_atlas.f $(FC) $(FFLAGS) $(NOFREE) -c lapack_atlas.f linpack_double.o: linpack_double.f $(FC) $(FFLAGS) $(NOFREE) -c linpack_double.f linpack_single.o: linpack_single.f $(FC) $(FFLAGS) $(NOFREE) -c linpack_single.f .c.o: $(CC) $(CFLAGS) -c $*.c .F.o: $(CPP) $(FC) $(FFLAGS) $(FREE) $(INCS) -c $*.f .F.f: $(CPP) .f.o: $(FC) $(FFLAGS) $(FREE) $(INCS) -c $*.f |
7樓2011-05-18 09:54:05
ellsaking
金蟲 (正式寫手)
- 1ST強帖: 1
- 應助: 1 (幼兒園)
- 貴賓: 0.052
- 金幣: 1012.9
- 散金: 1329
- 紅花: 5
- 帖子: 352
- 在線: 154.9小時
- 蟲號: 950793
- 注冊: 2010-01-30
- 專業: 催化化學
★
賀儀(金幣+1): 謝謝你的熱心幫助 2011-05-18 13:45:24
賀儀(金幣+1): 謝謝你的熱心幫助 2011-05-18 13:45:24
| 你這問的人都沒法回答，基礎編譯的東西隨便在網上都能搜到，怎么不去看一看呢？先給你發一個傳送門，我以前靠這個帖子和百度成功編譯了vasp，祝你成功。http://www.gaoyang168.com/bbs/viewthread.php?tid=1354235# |
8樓2011-05-18 10:11:15
enola
捐助貴賓 (正式寫手)
- 1ST強帖: 2
- 應助: 13 (小學生)
- 金幣: 1485.9
- 散金: 1549
- 紅花: 14
- 帖子: 847
- 在線: 102.5小時
- 蟲號: 947564
- 注冊: 2010-01-24
- 專業: 半導體光電子器件
9樓2011-05-18 13:36:49
|
.SUFFIXES: .inc .f .f90 .F #----------------------------------------------------------------------- # Makefile for Intel Fortran compiler for Pentium/Athlon/Opteron # bases systems # we recommend this makefile for both Intel as well as AMD systems # for AMD based systems appropriate BLAS and fftw libraries are # however mandatory (whereas they are optional for Intel platforms) # # The makefile was tested only under Linux on Intel and AMD platforms # the following compiler versions have been tested: # - ifc.7.1 works stable somewhat slow but reliably # - ifc.8.1 fails to compile the code properly # - ifc.9.1 recommended (both for 32 and 64 bit) # - ifc.10.1 partially recommended (both for 32 and 64 bit) # tested build 20080312 Package ID: l_fc_p_10.1.015 # the gamma only mpi version can not be compiles # using ifc.10.1 # # it might be required to change some of library pathes, since # LINUX installation vary a lot # Hence check ***ALL*** options in this makefile very carefully #----------------------------------------------------------------------- # # BLAS must be installed on the machine # there are several options: # 1) very slow but works: # retrieve the lapackage from ftp.netlib.org # and compile the blas routines (BLAS/SRC directory) # please use g77 or f77 for the compilation. When I tried to # use pgf77 or pgf90 for BLAS, VASP hang up when calling # ZHEEV (however this was with lapack 1.1 now I use lapack 2.0) # 2) more desirable: get an optimized BLAS # # the two most reliable packages around are presently: # 2a) Intels own optimised BLAS (PIII, P4, PD, PC2, Itanium) # http://developer.intel.com/software/products/mkl/ # this is really excellent, if you use Intel CPU's # # 2b) probably fastest SSE2 (4 GFlops on P4, 2.53 GHz, 16 GFlops PD, # around 30 GFlops on Quad core) # Kazushige Goto's BLAS # http://www.cs.utexas.edu/users/kgoto/signup_first.html # http://www.tacc.utexas.edu/resources/software/ # #----------------------------------------------------------------------- # all CPP processed fortran files have the extension .f90 SUFFIX=.f90 #----------------------------------------------------------------------- # fortran compiler and linker #----------------------------------------------------------------------- FC=/opt/intel/bin/ifort # fortran linker FCL=$(FC) #----------------------------------------------------------------------- # whereis CPP ?? (I need CPP, can't use gcc with proper options) # that's the location of gcc for SUSE 5.3 # # CPP_ = /usr/lib/gcc-lib/i486-linux/2.7.2/cpp -P -C # # that's probably the right line for some Red Hat distribution: # # CPP_ = /usr/lib/gcc-lib/i386-redhat-linux/2.7.2.3/cpp -P -C # # SUSE X.X, maybe some Red Hat distributions: CPP_ = ./preprocess <$*.F | /usr/bin/cpp -P -C -traditional >$*$(SUFFIX) #----------------------------------------------------------------------- # possible options for CPP: # NGXhalf charge density reduced in X direction # wNGXhalf gamma point only reduced in X direction # avoidalloc avoid ALLOCATE if possible # PGF90 work around some for some PGF90 / IFC bugs # CACHE_SIZE 1000 for PII,PIII, 5000 for Athlon, 8000-12000 P4, PD # RPROMU_DGEMV use DGEMV instead of DGEMM in RPRO (depends on used BLAS) # RACCMU_DGEMV use DGEMV instead of DGEMM in RACC (depends on used BLAS) #----------------------------------------------------------------------- CPP = $(CPP_) -DHOST=\"LinuxIFC\" \ -Dkind8 -DCACHE_SIZE=12000 -DPGF90 -Davoidalloc -DNGXhalf \ # -DRPROMU_DGEMV -DRACCMU_DGEMV #----------------------------------------------------------------------- # general fortran flags (there must a trailing blank on this line) # byterecl is strictly required for ifc, since otherwise # the WAVECAR file becomes huge #----------------------------------------------------------------------- FFLAGS = -FR -lowercase -assume byterecl #----------------------------------------------------------------------- # optimization # we have tested whether higher optimisation improves performance # -axK SSE1 optimization, but also generate code executable on all mach. # xK improves performance somewhat on XP, and a is required in order # to run the code on older Athlons as well # -xW SSE2 optimization # -axW SSE2 optimization, but also generate code executable on all mach. # -tpp6 P3 optimization # -tpp7 P4 optimization #----------------------------------------------------------------------- # ifc.9.1, ifc.10.1 recommended OFLAG=-O3 OFLAG_HIGH = $(OFLAG) OBJ_HIGH = OBJ_NOOPT = DEBUG = -FR -O0 INLINE = $(OFLAG) #----------------------------------------------------------------------- # the following lines specify the position of BLAS and LAPACK # VASP works fastest with the libgoto library # so that's what we recommend #----------------------------------------------------------------------- # mkl.10.0 # set -DRPROMU_DGEMV -DRACCMU_DGEMV in the CPP lines #BLAS=-L/opt/intel/mkl100/lib/em64t -lmkl -lpthread # even faster for VASP Kazushige Goto's BLAS # http://www.cs.utexas.edu/users/kgoto/signup_first.html # parallel goto version requires sometimes -libverbs BLAS= /opt/GotoBLAS2/libgoto2_penrynp-r1.13.so # LAPACK, simplest use vasp.5.lib/lapack_double LAPACK= ../vasp.5.lib/lapack_double.o # use the mkl Intel lapack #LAPACK= -lmkl_lapack #----------------------------------------------------------------------- LIB = -L../vasp.5.lib -ldmy \ ../vasp.5.lib/linpack_double.o $(LAPACK) \ $(BLAS) # options for linking, nothing is required (usually) LINK = #----------------------------------------------------------------------- # fft libraries: # VASP.5.2 can use fftw.3.1.X (http://www.fftw.org) # since this version is faster on P4 machines, we recommend to use it #----------------------------------------------------------------------- FFT3D = fft3dfurth.o fft3dlib.o # alternatively: fftw.3.1.X is slighly faster and should be used if available #FFT3D = fftw3d.o fft3dlib.o /opt/libs/fftw-3.1.2/lib/libfftw3.a #======================================================================= # MPI section, uncomment the following lines until # general rules and compile lines # presently we recommend OPENMPI, since it seems to offer better # performance than lam or mpich # # !!! Please do not send me any queries on how to install MPI, I will # certainly not answer them !!!! #======================================================================= #----------------------------------------------------------------------- # fortran linker for mpi #----------------------------------------------------------------------- #FC=mpif77 #FCL=$(FC) #----------------------------------------------------------------------- # additional options for CPP in parallel version (see also above): # NGZhalf charge density reduced in Z direction # wNGZhalf gamma point only reduced in Z direction # scaLAPACK use scaLAPACK (usually slower on 100 Mbit Net) #----------------------------------------------------------------------- #CPP = $(CPP_) -DMPI -DHOST=\"LinuxIFC\" -DIFC \ # -Dkind8 -DCACHE_SIZE=4000 -DPGF90 -Davoidalloc -DNGZhalf \ # -DMPI_BLOCK=8000 ## -DRPROMU_DGEMV -DRACCMU_DGEMV #----------------------------------------------------------------------- # location of SCALAPACK # if you do not use SCALAPACK simply leave that section commented out #----------------------------------------------------------------------- #BLACS=$(HOME)/archives/SCALAPACK/BLACS/ #SCA_=$(HOME)/archives/SCALAPACK/SCALAPACK #SCA= $(SCA_)/libscalapack.a \ # $(BLACS)/LIB/blacsF77init_MPI-LINUX-0.a $(BLACS)/LIB/blacs_MPI-LINUX-0.a $(BLACS)/LIB/blacsF77init_MPI-LINUX-0.a SCA= #----------------------------------------------------------------------- # libraries for mpi #----------------------------------------------------------------------- #LIB = -L../vasp.5.lib -ldmy \ # ../vasp.5.lib/linpack_double.o $(LAPACK) \ # $(SCA) $(BLAS) # FFT: fftmpi.o with fft3dlib of Juergen Furthmueller #FFT3D = fftmpi.o fftmpi_map.o fft3dfurth.o fft3dlib.o # alternatively: fftw.3.1.X is slighly faster and should be used if available #FFT3D = fftmpiw.o fftmpi_map.o fftw3d.o fft3dlib.o /opt/libs/fftw-3.1.2/lib/libfftw3.a #----------------------------------------------------------------------- # general rules and compile lines #----------------------------------------------------------------------- BASIC= symmetry.o symlib.o lattlib.o random.o SOURCE= base.o mpi.o smart_allocate.o xml.o \ constant.o jacobi.o main_mpi.o scala.o \ asa.o lattice.o poscar.o ini.o xclib.o xclib_grad.o \ radial.o pseudo.o mgrid.o gridq.o ebs.o \ mkpoints.o wave.o wave_mpi.o wave_high.o \ $(BASIC) nonl.o nonlr.o nonl_high.o dfast.o choleski2.o \ mix.o hamil.o xcgrad.o xcspin.o potex1.o potex2.o \ constrmag.o cl_shift.o relativistic.o LDApU.o \ paw_base.o metagga.o egrad.o pawsym.o pawfock.o pawlhf.o rhfatm.o paw.o \ mkpoints_full.o charge.o dipol.o pot.o \ dos.o elf.o tet.o tetweight.o hamil_rot.o \ steep.o chain.o dyna.o sphpro.o us.o core_rel.o \ aedens.o wavpre.o wavpre_noio.o broyden.o \ dynbr.o rmm-diis.o reader.o writer.o tutor.o xml_writer.o \ brent.o stufak.o fileio.o opergrid.o stepver.o \ chgloc.o fast_aug.o fock.o mkpoints_change.o sym_grad.o \ mymath.o internals.o dimer_heyden.o dvvtrajectory.o vdwforcefield.o \ hamil_high.o nmr.o force.o \ pead.o subrot.o subrot_scf.o pwlhf.o gw_model.o optreal.o davidson.o \ electron.o rot.o electron_all.o shm.o pardens.o paircorrection.o \ optics.o constr_cell_relax.o stm.o finite_diff.o elpol.o \ hamil_lr.o rmm-diis_lr.o subrot_cluster.o subrot_lr.o \ lr_helper.o hamil_lrf.o elinear_response.o ilinear_response.o \ linear_optics.o linear_response.o \ setlocalpp.o wannier.o electron_OEP.o electron_lhf.o twoelectron4o.o \ ratpol.o screened_2e.o wave_cacher.o chi_base.o wpot.o local_field.o \ ump2.o bse.o acfdt.o chi.o sydmat.o INC= vasp: $(SOURCE) $(FFT3D) $(INC) main.o rm -f vasp $(FCL) -o vasp main.o $(SOURCE) $(FFT3D) $(LIB) $(LINK) makeparam: $(SOURCE) $(FFT3D) makeparam.o main.F $(INC) $(FCL) -o makeparam $(LINK) makeparam.o $(SOURCE) $(FFT3D) $(LIB) zgemmtest: zgemmtest.o base.o random.o $(INC) $(FCL) -o zgemmtest $(LINK) zgemmtest.o random.o base.o $(LIB) dgemmtest: dgemmtest.o base.o random.o $(INC) $(FCL) -o dgemmtest $(LINK) dgemmtest.o random.o base.o $(LIB) ffttest: base.o smart_allocate.o mpi.o mgrid.o random.o ffttest.o $(FFT3D) $(INC) $(FCL) -o ffttest $(LINK) ffttest.o mpi.o mgrid.o random.o smart_allocate.o base.o $(FFT3D) $(LIB) kpoints: $(SOURCE) $(FFT3D) makekpoints.o main.F $(INC) $(FCL) -o kpoints $(LINK) makekpoints.o $(SOURCE) $(FFT3D) $(LIB) clean: -rm -f *.g *.f *.o *.L *.mod ; touch *.F main.o: main$(SUFFIX) $(FC) $(FFLAGS)$(DEBUG) $(INCS) -c main$(SUFFIX) xcgrad.o: xcgrad$(SUFFIX) $(FC) $(FFLAGS) $(INLINE) $(INCS) -c xcgrad$(SUFFIX) xcspin.o: xcspin$(SUFFIX) $(FC) $(FFLAGS) $(INLINE) $(INCS) -c xcspin$(SUFFIX) makeparam.o: makeparam$(SUFFIX) $(FC) $(FFLAGS)$(DEBUG) $(INCS) -c makeparam$(SUFFIX) makeparam$(SUFFIX): makeparam.F main.F # # MIND: I do not have a full dependency list for the include # and MODULES: here are only the minimal basic dependencies # if one strucuture is changed then touch_dep must be called # with the corresponding name of the structure # base.o: base.inc base.F mgrid.o: mgrid.inc mgrid.F constant.o: constant.inc constant.F lattice.o: lattice.inc lattice.F setex.o: setexm.inc setex.F pseudo.o: pseudo.inc pseudo.F poscar.o: poscar.inc poscar.F mkpoints.o: mkpoints.inc mkpoints.F wave.o: wave.F nonl.o: nonl.inc nonl.F nonlr.o: nonlr.inc nonlr.F $(OBJ_HIGH): $(CPP) $(FC) $(FFLAGS) $(OFLAG_HIGH) $(INCS) -c $*$(SUFFIX) $(OBJ_NOOPT): $(CPP) $(FC) $(FFLAGS) $(INCS) -c $*$(SUFFIX) fft3dlib_f77.o: fft3dlib_f77.F $(CPP) $(F77) $(FFLAGS_F77) -c $*$(SUFFIX) .F.o: $(CPP) $(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX) .F$(SUFFIX): $(CPP) $(SUFFIX).o: $(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX) # special rules #----------------------------------------------------------------------- # these special rules are cummulative (that is once failed # in one compiler version, stays in the list forever) # -tpp5|6|7 P, PII-PIII, PIV # -xW use SIMD (does not pay of on PII, since fft3d uses double prec) # all other options do no affect the code performance since -O1 is used fft3dlib.o : fft3dlib.F $(CPP) $(FC) -FR -lowercase -O2 -c $*$(SUFFIX) fft3dfurth.o : fft3dfurth.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) fftw3d.o : fftw3d.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) wave_high.o : wave_high.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) radial.o : radial.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) symlib.o : symlib.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) symmetry.o : symmetry.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) wave_mpi.o : wave_mpi.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) wave.o : wave.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) dynbr.o : dynbr.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) asa.o : asa.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) broyden.o : broyden.F $(CPP) $(FC) -FR -lowercase -O2 -c $*$(SUFFIX) us.o : us.F $(CPP) $(FC) -FR -lowercase -O1 -c $*$(SUFFIX) LDApU.o : LDApU.F $(CPP) $(FC) -FR -lowercase -O2 -c $*$(SUFFI |
10樓2011-05-18 15:17:51
相關版塊跳轉
我要訂閱樓主 tuhaidan 的主題更新
| 最具人氣熱帖推薦 [查看全部] | 作者 | 回/看 | 最后發表 | |
|---|---|---|---|---|
|
[考研] 286分人工智能專業請求調劑愿意跨考！ +3 | lemonzzn 2026-03-17 | 5/250 |
|
|---|---|---|---|---|
|
[考研] 一志愿西安交通大學材料工程專業 282分求調劑 +7 | 楓橋ZL 2026-03-18 | 9/450 |
|
|
|
[考研] 二本跨考鄭大材料306英一數二 +3 | z1z2z3879 2026-03-17 | 3/150 |
|
|
|
[考研] 一志愿中國石油大學（華東） 本科齊魯工業大學 +3 | 石能偉 2026-03-17 | 3/150 |
|
|
|
[考研] 材料 336 求調劑 +3 | An@. 2026-03-18 | 4/200 |
|
|
|
[考研] 324分 085600材料化工求調劑 +4 | llllkkkhh 2026-03-18 | 4/200 |
|
|
|
[考研] 304求調劑 +6 | 曼殊2266 2026-03-18 | 6/300 |
|
|
|
[考研] 290求調劑 +7 | ^O^乜 2026-03-19 | 7/350 |
|
|
|
[考研] 0817 化學工程 299分求調劑 有科研經歷 有二區文章 +22 | rare12345 2026-03-18 | 22/1100 |
|
|
|
[考研] 319求調劑 +3 | 小力氣珂珂 2026-03-20 | 3/150 |
|
|
|
[考研] 0703化學調劑 ，六級已過，有科研經歷 +13 | 曦熙兮 2026-03-15 | 13/650 |
|
|
|
[考研] 一志愿南理工085701環境302求調劑院校 +3 | 葵梓衛隊 2026-03-20 | 3/150 |
|
|
|
[考研] 08工學調劑 +5 | 用戶573181 2026-03-20 | 5/250 |
|
|
|
[考研] 266求調劑 +5 | 陽陽哇塞 2026-03-14 | 10/500 |
|
|
|
[考研] 材料與化工求調劑 +7 | 為學666 2026-03-16 | 7/350 |
|
|
|
[考研] 本科鄭州大學物理學院，一志愿華科070200學碩，346求調劑 +4 | 我不是一根蔥 2026-03-18 | 4/200 |
|
|
|
[考研] 收復試調劑生 +4 | 雨后秋荷 2026-03-18 | 4/200 |
|
|
|
[考研] 材料專碩326求調劑 +6 | 墨煜姒莘 2026-03-15 | 7/350 |
|
|
|
[考研] 304求調劑 +4 | ahbd 2026-03-14 | 4/200 |
|
|
|
[考研] 326求調劑 +3 | mlpqaz03 2026-03-15 | 3/150 |
|